Best Quality Fish Feed Processing Machine
1.Introduction Fish Feed Processing Machine
Fish food equipment, fish feed machine is specially designed to
produce daily food and healthy food for every kind of cat and dog.
Adopting preconditioning system for raw material, it can increase
capacity and reduce power consumption.
In extruder, the ingredients are cooked under intense heat and
pressure as it moves toward the open end of the extruder where
ingredients pass through a shaping die and knife. Dog food is dried
in amultipass dryer until its moisture content is low enough to
make it shelf stableDog food may passthrougha coating drum where
animal fat and vitamins are applied onto dog food.
a. Raw materials adopts wheat flour, rice flour, corn flour, soybean flour, fish
meal, bone meal etc as raw materials.
b. Products this line can be used to produce fish pellets, the
pellets size can be from 1.0mm to 12.0mm by adjusting the dies from
extruder; meanwhile it can produce dog food, cat food.
c. Capacity 150kg/h, 240kg/h, 500kg/h, 1ton/h, 2ton/h, 3tons
d. Flow chart Mixing system---Extrusion system----Drying
system----Flavoring system---Packing system
e. Voltage in China Three phases; 380V/50Hz, Single phase; 220V/50Hz,
we can make it according to customers’ Local voltage according to
different countries.
f. Machines Materials
Machine Material: Stainless Steel #304, thickness:1.2mm
Main Motor: Siemens China brand
Main Electric elements: Siemens or CHNT brand
Inverter: Delta brand
2.Food Equipment:
Mixer---double-screw extruder---air conveyer---roasting
oven---automatic flavoring machine
3.Details
Extruder
Large capacity pet food extruder,which is widely used in puffing
food, medicine and food industry.
It can carry out best parameterenactment according to different
recipe, water,pressure and temperature, The barrel is heated
by steam.
Inside the extruder
4.Mould
These are some molds for pet food, we can change them according to
the needs of customers.
5.Our srvice
Saibainuo Company before sales service :
a.) We provide you the suitable solution,which is useful and
convenient
b.) We produced the product you need in our factory,you can buy it
without any hesitate.
c.) We provide you the factory design and processing line layout
and also design for water and electric and gas etc.
d.) With much experienced technical team,we can meet customer
personalized requirement,produce the customized machine for you
Saibainuo Company after sales service :
a.) Consultation service before, during, and after sales;
b.) Project planning and design services;
c.) Debugging of equipment until everything is functional;
d.) Management of equipments' long distance shipping from seller's
factory to named place by buyer;
e.) Training of equipment maintenance and operating personally;
d.) New production techniques and formulas;
g.) Provide 1 year complete warranty and life-time maintenance
service.
6.Exhibition
7.Our company
Saibainuo is a leading manufacturer of high quality Twin Screw Extruders for
food industries.
We have almost ten years’ experience of working with our customers
providing specialist designs
and practical solution for a wide range of process needs.
Factory standing area:30000 square meters
Workshop standing area:20000 square meters
Office area:4 floor with 600 square meters.
