Access Control Pedestrian Security Swing Arm Turnstile For hospital
Entrance
Swing gate is the barrier gate blocking and releasing by swinging
the barrier. The material of the barrier is usually stainless
steel, plexiglass, acrylic. It is mainly used for the management of
entries and exits. The usual application places
allow people to pass, or for people who have luggage, and disabled
people with wheelchair
Features & function of swing arm barrier
1. Support bi-directional opening
2. Can integrate with access control system.
3. Trigger to open by dry contact. Automatic close back after auto
timer elapsed. Delay time can be programmed on swing barrier
control panel.
4. Trigger to open by dry contact (NC) and close by dry contact
(NO). This allowed access control reader to control swing barrier
opening and closing time.
5. During power failure, swing barrier will automatically open up
to allow free access. When power resume, swing barrier will
automatically close back to resume security level.
6. Built in clutch that will automatically disengage motor drive
from gearbox when the gate is obstructed. Clutch release reduce
impact force to minimum in the event that gate closed onto passing
users. This also protect the motor and control panel from being
damaged due to overload.
7. Optional safety IR beam can be added to auto reverse the gate
upon detecting obstacle in the passage way. This way the gate is
reversed before even hitting user that is still in the passage way.
More safety to the user.
8. Gate length can be easily customized to fit site requirement.
9. Auto synchronized opening when 2 swing barriers are installed
for the same passage. Both side will open and close at the same
time.
10. Gate motor mechanism is self lock at open and close position.
11.The electric control adopts DC motor to drive stable and
reliable, and has low failure rate.
12. Ultra high light traffic indicator function: directional
instructions are designed with ultra bright LED lights, indicating
more prominently;
13. In the case of the person who has not swiped the card into the
passageway, the equipment alarm will prompt the traveler to swipe
the card.
14.
Specifications of swing arm barrier:
Description | Specification |
| Channel width | 600mm (default) |
| Arm lenght | 530mm (default) |
Access device input voltage | Dry contact or 12V electrical level signal or > 100ms 12V impulse signal, driving current > 10mA |
Motor voltage | DC 24V (brush motor) |
Max flow rate | 35 person per minute |
Gate swing angle | 180 degree |
Gate opening speed | 1s |
Reset time when power on | 3s |
Working temperature | -20°C~60°C |
| Package | Wooden box |
