Medical needle tube (needle) toughness tester
Product Description:
The medical needle tube (needle) toughness tester is designed and
manufactured according to the relevant provisions of gb18457-2015,
(eqviso9626-1991) "manufacturing medical stainless steel". It is
specially used to test the toughness of medical needle.
Product introduction:
Rx9626-d medical needle (needle) toughness tester is composed of
intelligent controller, positioning mechanism, swing mechanism,
fixture and so on. The intelligent controller is composed of CPU,
motherboard, LCD screen, power supply and so on. The whole machine
has a high degree of automation. After the tested object is
installed, the user can automatically complete all operations by
pressing the only operation key.
It adopts 5.7 inch (120 × 90) LCD screen Chinese menu display,
touch operation: tube wall: normal wall, thin wall and ultra-thin
wall
Nominal size of needle tube: 0.2-3.4mm;
Test frequency: 0.5Hz;
Rocker arm swing bending angle: 15 °, 20 ° and 25 ° three
positions, the switch sets the bending angle, and 4-bit high
brightness LED display;
Bending distance: 6-31.5mm, accuracy: ± 0.1mm (10 specifications);
The number of experiments: two-way force was applied 20 times.
Net weight: 10kg
Overall dimension: 300 × 240 × 240 (mm)
The instrument will be upgraded free of charge according to the
national standard
technical parameter
Environmental Science
Working temperature: 5 ～ 40 ℃
Relative humidity: 45-80%
Power supply voltage: 220 V ± 22 V
Power grid frequency: 50 Hz ± 1 Hz
Equipment type: type I, type B
Display mode
Four high brightness LED liquid crystal display is adopted.
Three position switch is used to set the bending angle of the
measured object.
Power consumption: 200va
Experimental frequency: 0.5Hz ± 0.025hz.
Bending angle: 15 ℃, 20 ℃, 25 ℃, and the error shall not be greater
than ± 2 ℃
The force was applied in both directions for 20 times.
Related accessories:
Printing paper, weight
