Double Column Computerized Universal Test Machine 20kN
GENERL SPECIFICATIONS
Estimated Packaging Dimensions: (W*D*H) 690*1080*1790mm
Power supply source: single-phase, 220V, 50/60Hz (can be appointed)
Estimated Gross Weight: 250kg
HS Code: 9024800000
STANDARD FEATURES
| Item | Description |
| Frame capacity | 2000kg |
| Load cell brand | Germany brand load cell for high accuracy 2000kg (500,1000kg are optional) |
| Load accuracy | 0.5% F.S |
| Control system | PC with windows 7 system |
| Motor | Panasonic servo motor w/AC variable speed drive system,
high-precision mechanical ball screw rod |
| Force reading | kgf, Ibf, N, KN, T etc |
| Vertical test space | 1200mm including fixture |
| Horizontal test space | ≤400mm |
| Test speed | 0.1~500mm/min (adjustable) |
| Software | TM 2101 |
| Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
| Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm,
N/mm2) etc… |
| Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
APPLICATIONS
- Tested sample: laminated materials, wood, leather, rubber & plastic, metal
material, etc.
- Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force.
- Deformation under defined load: Test deformation under defined load of tested sample
- Load under defined deformation: Test load under defined deformation of tested sample
- Software can issue word/excel report with results for max. force, elongation, tensile strength, peel
strength, tear strength, compression strength, etc.
QUALITY ASSURANCE
1. The guarantee period with FOC within 1 year (not including
expendable parts cost and transport & travel fees)
1.1 During the guarantee period, Haida shall supply free
maintenance or replacement for the damaged part (just for
non-expendable part) caused by non-human reasons;
1.2 If any quality problems occur within the guarantee period, and
Haida must provide on-site service, the transport and travel
expense shall be borne by buyer;
1.3 If any big quality problems occurs out of the guarantee period,
Haida will provide a maintain service, the transport and travel
expense shall be borne by buyer, also charge for a favorable price
for new parts;
1.4 Haida will provide a lifetime favorable price to the buyer for
expendable & non-expendable parts used in system operation,
equipment maintenance;
2. The following conditions need to be paid reasonably even in the
guarantee period:
2.1 Natural disaster
2.2 Operating mistakes
2.3 Voltage is not fit for our manual
2.4 Uninstall without our guides
2.5 Damaged for borrowing to others
2.6 Damaged for without authorized machine modification
2.7 Damaged for without authorized calibration
2.8 Without authorized transshipment mistake
3. Attentions: the machine cannot be used following situations:
3.1 Vibration, rocking place.
3.2 Direct sunlight.
3.3 Hot, dusty, damp places.
3.4 To ensure safe, AC supply of the machine should be well
grounded.
3.5 Do not use strong solvents (such as: benzene, nitro oil)
washing machine.
3.6 Do not inject water and debris into the machine to prevent
damage to electrical components and electrical shock.
3.7 Machine’s disassembly and debugging can only be measured by the
State Department approved the units and the company, other people
not allowed to overhaul.
