Non-Standard Custom UV LED Curing Systems Surface Light Source
UVLED curing is a kind of UV curing, which uses UVLED light source
to cure UV ink, UV glue,
UV coating, etc.
Various adhesive manufacturers have developed a series of UV
products for bonding, sealing, printing,
etc. according to the UV curing characteristics, and they are
widely used in many fields such as
communications, electronics, optics, and printing. These products
will be cured or hardened (polymerized)
under UV light (a certain wavelength and a certain light
intensity), and it is more efficient, energy-saving
and environmentally friendly than traditional products-UV light
curing.
Compared with traditional UV curing equipment, the service life of
the mercury lamp is only 800-3000
hours, and the service life of the UV LED ultraviolet curing system
can reach 20,000-30,000 hours.
The LED method can be lit instantaneously only when ultraviolet
light is needed. When DUIY=1/5
(preparation time=5 irradiation time=1), the service life of the
LED method is equivalent to 30-40 times
that of the mercury lamp method. Reduce the time to replace the
bulb: improve production efficiency,
but also very energy-saving. When the traditional mercury lamp
curing equipment is working, because
the mercury lamp starts slowly and the opening and closing affects
the bulb life, it must be lit all the time,
which not only causes unnecessary power consumption but also
shortens the working life of the
mercury lamp.
