Constant Temperature Industrial Drying Oven
Suitable for baking chemical gas and food processing industry to
bake goods, substrate
stress removal, ink curing, paint film drying, electronics,
electrical, communications,
electroplating, plastic, metal,composite,chemical, food, printing,
pharmaceutical, PC board,
powder, immersion, spraying, glass, ceramics, wood building
materials...... And so on the
precision baking, drying, tempering, preheating, shaping,
processing and so on.
Structure of industrial oven
The industrial oven is an internal and external double-layer
structure, the shell is an angle steel
thin steel plate, and a fiber material is filled between the inner
and outer double-layer shells. The
fiber material used in the industrial oven is mainly aluminum
silicate, and can play the role of heat
preservation and form a reliable heat-insulating layer. The
industrial oven is equipped with a hot
air circulation system and a temperature measurement and control
system.
Principle of operation
The temperature is controlled by the connection between the digital
display instrument and the
temperature sensor. The hot air circulation system is divided into
horizontal type and vertical type
by using the hot air circulation air supply mode. After accurate
calculation, the air source is driven
by the air supply motor to send the hot air to the air duct and
enter the oven studio through the
electric heater, and the air suction duct after use can be used as
the air source to reheat, so that
the temperature uniformity can be effectively improved. If the box
door is switched on and off in
use, the air supply circulation system can quickly restore the
operating state temperature value.
The principle of an industrial oven
When the industrial oven is working, the operator obtains the
temperature value inside the industrial
oven through the instrument and the temperature sensor, and
operates through the control system.
Compared with the ordinary heat dissipation heating method, the hot
air circulation heating mode of
the industrial oven has better gas flow and can speed up the drying
speed of the materials in the
industrial oven.
The hot air circulation system of industrial oven is composed of
air supply motor, air turbine and electric
heater. The air supply motor drives the air turbine to send out
cold air. The cold air is heated by electric
heating equipment and carries heat energy, and then enters the oven
studio through the air duct.
The hot air circulation system of industrial oven is beneficial to
improve the uniformity of air temperature.
in the process of transporting materials at the door of industrial
oven switch box, the temperature value
will be affected, and the uniformity of hot air circulation system will be beneficial to restore the
temperature value of working state within the maximum speed.
