Refractory Brick Manufacturer Provide Curved Round Clay Fire Brick
Curved firebrick is made from low mullite stones, the main mineral
composition of the low mullite stones are pressed and sintered
mullite phases. curved firebricks have very good physical and
chemical properties in high temperature conditions. curved fire
brick is widely used in the non-ferrous metal metallurgy, glass
industry, ceramic kiln, cement rotary kiln, steelmaking furnace,
chemical industry, construction industry and other industries.
Curved Firebrick Description
curved refractory brick contains Al2O3 about 30% ~ 45%, and silica
content is lower than 78%. curved refractory bricks belong to the
weak acid refractory materials. curved refractory block is resistant to acid slag and the erosion
of acid gases, but the alkali resistance ability is a bit poor.
curved refractory blocks have the characters of good thermal
performance and good thermal shock resistance.
Properties of Curved Firebrick
.High refractoriness,
.Good corrosion resistance,
Good thermal shock resistance,
.High mechanical strength,
.High-temperature creep rate is low,
.Good spalling resistance and wear resistance.
Rongsheng Refractory Curved Firebrick Specifications
| Curved Firebrick |
| Index | 40 – 45% Alumina
Fireclay Brick | 30 – 35% Alumina
Fireclay Brick |
| Item | Unit | 1600°C | 1500°C |
| Bulk Density | g/cm³ | 2.2 | 2.1 |
| Apparent Porosity | % | 22 | 24 |
| Modulus of Rupture | kg/cm² | 90 | 80 |
| Cold Crushing Strength | kg/cm² | 300 | 250 |
| Linear Expansion 1350°C | % | 0.2 | 0.2 |
| Refractoriness Under Load | °C | 1450 | 1300 |
Application of Curved Firebrick
Curved firebrick is mainly used for the insulating lining of hot
surfaces or backing heat-insulating layers of other refractory
materials. the refractory linings or heat-insulating materials of
the industries, such as ethylene pyrolysis furnaces, tubular
furnaces, reforming furnaces of synthetic ammonia, gas generators
and high- temperature shullte kilns,etc.
