36V 1000A anodizing rectifier
The application range of the anodizing rectifier includes aluminum
profile anodizing, aluminum products anodizing coloring, hard
anodizing, etc. The anodizing power supply current range is
1A～30000A, and the Anodzing power supply voltage range is 1
V～2000V.
Specification
| SPECIFICATIONS FOR GKD36-1000CVC |
| Input AC | 380V±10% | 3 phase | 50/60Hz |
| Output DC | Volt | 0~36V Adjustable |
| Current | 0~1000A Adjustable |
| Power | 36KW |
| Efficiency | >85% |
| output Frequency | 40KHz fixed |
| output ripple | 5% |
| Protection | Short circuit protection
Overheating protection
Phase lack protection
Input over/low voltage protection |
Working Condition
(Temperature) | -10℃~50℃ | Control mode | Panel control
Remote control |
| Net weight | 250kg | Working mode | Constant Voltage(CV)
Constant Current(CC) |
| Dimension(mm) | 790*910*1080mm | Cooling way | air cooling |
36V 1000A anodizing rectifier features
1. Reduce the porosity, the formation speed of the core is greater
than the growth rate, which promotes the refinement of the core.
2. Improve the overall strength and make the passivation film break
down, which is conducive to the firm integration between the
substrate and the coating.
3. Improve the coverage and dispersion ability. The high negative
potential of the cathode can also deposit passivated parts in
ordinary electroplating, and slow down the "scorching" and
"shuttle-like" of the protruding parts of complicated parts due to
excessive consumption of deposited ions "Deposited defects, for
obtaining a given characteristic of the coating (such as color,
non-porous l cough, etc.) thickness can be reduced to the original
1/3" 1/2, saving raw materials.
4. Reduce the internal stress of the coating, improve character
defects, impurities, voids, tumors, etc., easily obtain crack-free
coatings, and reduce additives.
5. Lizi obtains a gold-containing coating with stable composition.
6. Improve the solution of anode without anode activator.
7. Improve the mechanical and physical properties of the coating,
such as increasing the density, reducing the surface electrical
resistance and bulk resistance, improving toughness, road
resistance, and corrosion resistance, and controlling the hardness
of the coating.
36V 1000A anodizing rectifier rectifier picture:
THE DIFFERENCE BETWEEN SCR & IGBT SWITCH RECTIFIER
1, efficiency
SCR: 70%
IGBT:90%
2,Transformer
SCR:Power frequency transformer, large volume about 200kg
IGBT:without Power frequency transformer
3,Energy saving efficiency
SCR: bad
IGBT: energy saving about 15%-30%
4, start/stop with load
SCR: can’t
IGBT: can
5,control circuit
SCR:Complex, request synchronous and difficult to integrate
IGBT:use the simple integrated circuit board, and anti-corrosion
treatment completely closed.
6,constant current accuracy
SCR:＜5%
IGBT:＜1%
7,cooling way
SCR: water/oil/air cooling
IGBT:water/air cooling
8,work frequency
SCR:50HZ
IGBT:20KHZ
9,control way
SCR:Phase shift trigger
IGBT: PWM
10,output DC
SCR:half wave
IGBT:High density DC square wave
11,Disturbance to power grid
SCR: large,Not easy to eliminate
IGBT: small,easy to eliminate
12,size and weight
SCR: large size and heavy
IGBT: small and light weight
13,Allowable fluctuation range of input voltage
SCR: ±10%
IGBT:±15%
36V 1000A anodizing rectifier Installation
| 1, Placing rectifier and keep the body stability; ensure good
ventilation. |
| 2, Checking anodizing rectifier out cover if loosing. |
| 3, Connecting shell to ground to prevent static electricity. |
| 4, Conecting the AC input wire |
| 5, Connecting the DC output copper bars |
| 6, Connecting the rectifier remote control box,if local control
,skip this step |
| 7, Turn on air switch, then the fan starts to rotate and the power
indicator light. |
| 8, Clockwise rotation adjustment button, voltmeter degree
increases, working indicate light lighting. |
| 9, Adjust knob to maximum, then the voltmeter should indicate the
rated voltage, current meter indicates the load volume accordingly. |
| 10, Disconnect the air switch, turn off the rectifier |
