ZM300B 300KG Crawler Small Tracked Dumpers

Little Tracked Power Barrow , Small Tracked Dumpers With Crawler 300KG Load Capacity

Mini dumper operation

Add fuel Manually add 93 # gasoline to the engine's fuel tank.

Start Engine Detailed description of engine operation, all relevant precautions and procedures can be found in the manual.

Cold start as follows

1. Open the position where the engine suction valve is completely blocked.

2. Place the throttle stick in the center of the handlebars.

3. Turn the engine switch to the ON position.

4. Pull the rope slowly to pump gas into the engine carburetor several times. Then pull the rope until the rope has resistance. Then quickly pull the rope while allowing the rope to gently return. Do not let the rope recover quickly until the engine starts.

Allow the engine to run for a few seconds before operating the machine.

operating

After starting the engine, increase the throttle to speed up. Shift can not stop walking but to reduce the throttle and then shift.

Operate the corresponding left handle or right handle to control the left or right turning of the machine. Turn the handle is very sensitive, when the machine is empty, only need to gently grip the steering handle. When the machine load, you need to use more force to grip the handle.

The maximum load of the mini transporter is 300kg. Speed can be adjusted according to the road conditions. When the machine is full, use low speed and careful driving. Avoid sharp turns and frequent changes as the minivan travels on the road. Use caution when the weather is bad, such as rain, snow, or icy roads. Because this will make the machine run unstable and thus dangerous. Idling speed

Turn off the machine when the machine is out of work and lowering the engine speed will help extend the life of the engine and save fuel and reduce machine noise.

Stop the engine

In an emergency, please release the red handle, the machine will stop walking, and then the engine is adjusted to "off" gear to stop the engine.

Main Parameter

Jinzhou City Shitan Machinery Equipment CO. LTD. is a professional production and

processing company for core drilling rigs, crawler drilling rigs, various track chassis, various

types of mud pumps, various track transport vehicles, etc. It is one of the outstanding

manufacturers of similar products in North China. Strong technical force. The modern production

equipment and complete testing means are specialized in the development, manufacture and

marketing of drilling rigs.

To ensure the quality and stability of the machine, we use the most advanced production and testing

equipment, Made from high quality materials, with fashion and compact design, that keeps our drilling

rigs more efficiency and with low failure rate, more economic and durable, and with a high comprehensive

cost performance. Our water drilling rigs have received the real market validation as the majority of our

customer’s positive feedback.

The company's main products are rigs: XY-1, XY-1A, XY-1B, GK-180, GK-200, DPP-100 and other series

of drilling rigs: gearbox assemblies and gyro assemblies for various rigs, Winch assembly, reducer assembly,

pump assembly. Drilling tools: sedimentary pipe joints, casing joints, casing couplings, drill pipe joints, casing

core pipes, lifters, automatic drop hammers, earth borrowers, standard penetrations, forks, lock joints, alloy drill

bits Hundreds of drilling tools, such as steel sand drill bits, core pipe joints, drill pipe pliers, and casing pliers.

Jinzhou City Shitan Machinery Equipment CO. LTD. has a complete and scientific quality management

system. The integrity, strength and product quality of Jinzhou Stone Exploration Machinery Co., Ltd. have been

recognized by the industry. Welcome friends from all walks of life come to visit, guide and negotiate business!