Two-Stage Vacuum Extruder JKY75S - 4.0 Auto Brick Making Machine
1. Product features:
JKY75S - 4.0 Auto Brick Making Machine is made by full steel
structure .
1.Two-Stage Vacuum Extruder main parts adopts high wear- resistance alloy casting and high
frequency heat treatment technology. Its performance is stability,
the material can be coal gangue, shale, fly ash, industrial
residue. It is the ideal equipment for the fired bricks.
2.Machine mouth: The optimized die structure is combined with the
unique core extrusion technology of the reamer to support the
extrusion molding of multi-strips, porous bricks, hollow bricks,
and hollow brick blocks, which greatly increases the output and the
diversity of products
3.Receiving box: The mud after vacuum degassing falls into the
receiving box, and the screw reamer pushes it into the mud tank
during the relative rotation of the mud hammer and the screw
cutter.
2. Techical parameter
| Date | Units of meas | JKY75S-4.0 |
| Production capactyi | Pieces/h | 35000-50000 |
| Reamer diameter | mm | 750 |
| Pressure | Mpa | 4.0 |
| Moisture content | % | 13～18 |
| Vacuum degree | Mpa | ≤-0.092 |
| Power | kw | 350+132 |
| Size | mm | 8500×3000×3450 |
| Weight | kg | 36000 |
3.Product Description
The JKY75S - 4.0 Auto Brick Making Machine series clay brick making
machine are advanced twin-stage vacuum extruder which draw lessons
from the developed domestic, abroad experiences and design to make.
They are mainly made of high quality steel with features of
reasonable structure, sturdy and durability. And they have strong
applicability, high efficiency, easy maintenance but lower energy
consumption.
The machine’s axles, gear and other important spare parts extend
the service life which are made by carbon steel and alloy steel
through modulation or quench’s heat treatment procession. The
dialing mud plate’s transfer and material level control are fixed
with protecting device which improves the plant efficiency of
breakdown maintenance.
And it also makes sure that it can’t easily damage the main spare
parts during usage. The reamer adopt the floating shaft structure
which can eliminate and reduce the machine’s shacking and rocking
times because of curve in principal axle after long time
4.Product Advantage
1. Mainly used for coal gangue, coal ash, shale, clay and other raw
materials. It is an ideal equipment for producing various standard
bricks, hollow bricks, irregular bricks, high-porosity bricks, etc.
2 The main frame of the vacuum extruder is welded with high-quality
steel, which has the characteristics of low cost, reliable
performance and reasonableness.
5. Machine pictures
