1/2'' 12mm Push To Connect Extended Male Elbow Pneumatic Hose
Fittings
Brando's push in fittings (or push to connect fittings) provide
easy connection and disconnection tube without causing damage to
the tube. Composite push in fittings become essential parts in
pneumatic and fluid system. Brando's push in fittings are available
in a variety of types, moulds, sizes and thread types to satisfy
various metric and inch tube demands. Our composite push in
fittings could accommodate both metric size tubing and inch size
tubing that are made from polyurethane, polyethylene and nylon.
Composite push-in fittings are ideal for general pneumatic
industrial applications.
Brando's Push-In Fitting Features:
1. Optional shapes of Release Sleeve: As a manufacturer, Brando can
provide Oval and Round Release Sleeve
2. Multiple colors of Release Sleeve: Blue, Black, Orange, Red,
Orange, Gray
3. Accommodate kinds of connection thread type: R (PT, BSPT), G
(BSPP), NPT, UNF, UNC, Metric
4. Accommodate metric size tubing O.D: 3mm, 4mm, 5mm, 6mm, 7mm,
8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm
5. Accommodate inch size tubing O.D: 1/8", 5/32", 3/16", 1/4",
5/16", 3/8", 1/2", 5/8"
Dimension & Order Code of Pneumatic Hose Fittings:
Extended Male Elbow Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PLL4 | M5X0.8 | 4 | 11 | 6 | 19 | 38 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 38 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 30 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 41 | 13 |
| R3/8" | 4 | 11 | 10 | 19 | 43 | 17 |
| R1/2" | 4 | 11 | 11 | 19 | 44 | 21 |
| PLL6 | M5X0.8 | 6 | 13 | 6 | 20 | 41 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 41 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 43 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 44 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 46 | 17 |
| R1/2" | 6 | 13 | 11 | 20 | 47 | 21 |
| PLL8 | R1/8" | 8 | 14 | 8 | 23 | 47 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 48 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 50 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 51 | 21 |
| PLL10 | R1/8" | 10 | 18 | 8 | 27 | 56 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 57 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 58 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 59 | 21 |
| PLL12 | R1/8" | 12 | 21 | 8 | 30 | 56 | 19 |
| R1/4" | 12 | 21 | 9 | 30 | 57 | 19 |
| R3/8" | 12 | 21 | 10 | 30 | 57 | 19 |
| R1/2" | 12 | 21 | 11 | 30 | 60 | 21 |
Male Banjo Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PH4 | M5X0.8 | 4 | 11 | 6 | 19 | 38 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 38 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 30 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 41 | 13 |
| PH6 | M5X0.8 | 6 | 13 | 6 | 20 | 41 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 41 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 43 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 44 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 46 | 17 |
| PH8 | R1/8" | 8 | 14 | 8 | 23 | 47 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 48 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 50 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 51 | 21 |
| PH10 | R1/8" | 10 | 18 | 8 | 27 | 56 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 57 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 58 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 59 | 21 |
| PH12 | R1/4'' | 12 | 21 | 10 | 33 | 28 | 15 |
| R3/8'' | 12 | 21 | 12 | 35 | 34 | 19 |
| R1/2'' | 12 | 21 | 13 | 37 | 37 | 24 |
Rhabditiform of Through Fitting:
| Picture | Dimension | Part No. | D | D1 | L1 | L | G |
 |  |
| PGJ4 | 4 | 11 | 17 | 35 | 4 |
| 4 | 13 | 18 | 36 | 6 |
| PGJ6 | 6 | 13 | 20 | 38 | 4 |
| 6 | 13 | 18 | 36 | 6 |
| 6 | 13 | 21 | 38 | 8 |
| PGJ8 | 8 | 15 | 20 | 42 | 4 |
| 8 | 15 | 21 | 42 | 6 |
| 8 | 15 | 21 | 41 | 8 |
| 8 | 17 | 23 | 43 | 10 |
| PGJ10 | 10 | 15 | 20 | 42 | 4 |
| 10 | 15 | 21 | 45 | 6 |
| 10 | 15 | 24 | 47 | 8 |
| 10 | 17 | 23 | 45 | 10 |
| 10 | 21 | 24 | 46 | 12 |
| PGJ12 | 12 | 21 | 20 | 44 | 6 |
| 12 | 24 | 20 | 49 | 8 |
| 12 | 26 | 20 | 50 | 10 |
| 12 | 24 | 21 | 47 | 12 |
List of All Plastic Pneumatic Hose Fittings:
FAQ:
1. How to install pneumatic push-in fittings?
The hose is easy to install by pushing it into the release ring-end
of the fitting until it stops. The internal lock claws will
automatically clamp around the hose for an immediate and secure
connection.
2. How to uninstall pneumatic push-in fittings?
Push the release ring inward towards the fitting to disengage the
lock claws and pull back on the tubing to remove it. The opposite
end may be another push to connect fitting, threaded male, threaded
female or a threaded male with an inner hex-type connection. The
threaded connections usually have a pre-applied thread lock
coating.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
