1/4'' 8mm Male Banjo Push In To Quick Connect Pneumatic Hose
Fittings
Selection criteria
Pneumatic fittings should be incorporated into a system that
requires connection hoses together. It is advised to keep things
simple to ensure no significant pressure drop is induced. For
example, don’t use a 90-degree elbow if a straight fitting is
possible because the elbow will create an unnecessary pressure
loss. Other considerations include:
1. Operating pressure: Most fittings have a maximum operating
pressure of 1.0MPa, but the pressure should be kept below this
level to ensure safe operation.
2. Operating temperature: Fittings contain o-rings and plastic
parts that may become ineffective if using hot air or if the system
is placed in a hot environment.
3. Special environments: medical and food industries may require
fittings with a special rating or material classification.
Dimension & Order Code of Pneumatic Hose Fittings:
Extended Male Elbow Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PLL4 | M5X0.8 | 4 | 11 | 6 | 19 | 38 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 38 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 30 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 41 | 13 |
| R3/8" | 4 | 11 | 10 | 19 | 43 | 17 |
| R1/2" | 4 | 11 | 11 | 19 | 44 | 21 |
| PLL6 | M5X0.8 | 6 | 13 | 6 | 20 | 41 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 41 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 43 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 44 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 46 | 17 |
| R1/2" | 6 | 13 | 11 | 20 | 47 | 21 |
| PLL8 | R1/8" | 8 | 14 | 8 | 23 | 47 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 48 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 50 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 51 | 21 |
| PLL10 | R1/8" | 10 | 18 | 8 | 27 | 56 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 57 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 58 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 59 | 21 |
| PLL12 | R1/8" | 12 | 21 | 8 | 30 | 56 | 19 |
| R1/4" | 12 | 21 | 9 | 30 | 57 | 19 |
| R3/8" | 12 | 21 | 10 | 30 | 57 | 19 |
| R1/2" | 12 | 21 | 11 | 30 | 60 | 21 |
Male Banjo Fitting:
| Picture | Dimension | Part No. | R | D | D1 | L1 | L | L' | S |
 |  |
| PH4 | M5X0.8 | 4 | 11 | 6 | 19 | 38 | 10 |
| M6X1 | 4 | 11 | 6 | 19 | 38 | 10 |
| R1/8" | 4 | 11 | 8 | 19 | 30 | 12 |
| R1/4" | 4 | 11 | 9 | 19 | 41 | 13 |
| PH6 | M5X0.8 | 6 | 13 | 6 | 20 | 41 | 12 |
| M6X1 | 6 | 13 | 6 | 20 | 41 | 12 |
| R1/8" | 6 | 13 | 8 | 20 | 43 | 12 |
| R1/4" | 6 | 13 | 9 | 20 | 44 | 13 |
| R3/8" | 6 | 13 | 10 | 20 | 46 | 17 |
| PH8 | R1/8" | 8 | 14 | 8 | 23 | 47 | 14 |
| R1/4" | 8 | 14 | 9 | 23 | 48 | 14 |
| R3/8" | 8 | 14 | 10 | 23 | 50 | 17 |
| R1/2" | 8 | 14 | 11 | 23 | 51 | 21 |
| PH10 | R1/8" | 10 | 18 | 8 | 27 | 56 | 27 |
| R1/4" | 10 | 18 | 9 | 27 | 57 | 17 |
| R3/8" | 10 | 18 | 10 | 27 | 58 | 17 |
| R1/2" | 10 | 18 | 11 | 27 | 59 | 21 |
| PH12 | R1/4'' | 12 | 21 | 10 | 33 | 28 | 15 |
| R3/8'' | 12 | 21 | 12 | 35 | 34 | 19 |
| R1/2'' | 12 | 21 | 13 | 37 | 37 | 24 |
Rhabditiform of Through Fitting:
| Picture | Dimension | Part No. | D | D1 | L1 | L | G |
 |  |
| PGJ4 | 4 | 11 | 17 | 35 | 4 |
| 4 | 13 | 18 | 36 | 6 |
| PGJ6 | 6 | 13 | 20 | 38 | 4 |
| 6 | 13 | 18 | 36 | 6 |
| 6 | 13 | 21 | 38 | 8 |
| PGJ8 | 8 | 15 | 20 | 42 | 4 |
| 8 | 15 | 21 | 42 | 6 |
| 8 | 15 | 21 | 41 | 8 |
| 8 | 17 | 23 | 43 | 10 |
| PGJ10 | 10 | 15 | 20 | 42 | 4 |
| 10 | 15 | 21 | 45 | 6 |
| 10 | 15 | 24 | 47 | 8 |
| 10 | 17 | 23 | 45 | 10 |
| 10 | 21 | 24 | 46 | 12 |
| PGJ12 | 12 | 21 | 20 | 44 | 6 |
| 12 | 24 | 20 | 49 | 8 |
| 12 | 26 | 20 | 50 | 10 |
| 12 | 24 | 21 | 47 | 12 |
List of All Plastic Pneumatic Hose Fittings:
FAQ:
1. How to install pneumatic push-in fittings?
The hose is easy to install by pushing it into the release ring-end
of the fitting until it stops. The internal lock claws will
automatically clamp around the hose for an immediate and secure
connection.
2. How to uninstall pneumatic push-in fittings?
Push the release ring inward towards the fitting to disengage the
lock claws and pull back on the tubing to remove it. The opposite
end may be another push to connect fitting, threaded male, threaded
female or a threaded male with an inner hex-type connection. The
threaded connections usually have a pre-applied thread lock
coating.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
