KGPS-1T/800KW Precious Metal Iron bronze aluminum scrap Induction
Melting Furnace price
1. Brief Introduction of Medium Frequency Induction Melting
Furnace:
The advantage of induction melting furnace has the obvious
characters contain high energy saving, small impact on the
grid,high melting rate,small oxidation loss, Environmental
protection, good insulation effect and so on.The coreless induction
melting furnace is suitable for melting of various ferrous or
non-ferrous metals.
An induction furnace consists of a nonconductive crucible holding
the charge of metal to be melted, surrounded by a coil of copper
wire. A powerful alternating current flows through the wire. The
magnetic field induces eddy currents, circular electric currents,
inside the metal, by electromagnetic induction.
2. Technical Parameter of Large Induction Melting Furnace:
| Model | KGPS-1T/800KW |
| Rated Power | 800kw |
| Rated Capacity | 1T |
| Matching transformer's capacity | 1000KVA |
| Voltage | 380V, 50/60HZ |
| MF Frequency | 800HZ |
| Medium Voltage | 750V Phase |
| DC Voltage | 500V Phase |
| DC Current | 1600A Phase |
| Rated Temperature | 1800°C |
| Closed Loop Water Cooling Tower | LSN-80B |
3. Large Induction Melting Furnace Application:
(1) iron, pig iron, cast iron;
(2) steel, stainless steel, cast steel, carbon steel and bearing
steel;
(3) gold, silver, platinum;
(4) copper, brass, bronze;
(5) aluminum, aluminum alloy;
(6) zinc, lead, tin, magnesium, nickel, titanium.
4. Advantage of Large Induction Melting Furnace :
Melting furnaces are used to overheat solid materials until they
liquefy. A melting furnace, by comparison, generates overhot
temperatures that exceed the metal's melting point and cause
decomposition of its physical structure which leads to
liquefaction.
An induction furnace is an electrical furnace in which the heat is
applied by induction heating.The advantage of the induction furnace
is a clean, energy-efficient and well-controllable melting process
compared to most other means of metal.
In an induction furnace, the metal charge material is melted or
heated by current generated by an electromagnetic field. When the
metal becomes molten, this field also causes the bath to move. This
is called inductive stirring.
5. Part of the melting furnace:
1). Furnace Parts: The mechanical parts of the MF furnace consisted of furnace
pot,water power introduced into the system, titling device and
other parts.
2). Furnace Ports: Furnace port including furnace shell, induction coil etc.
3). Furnace Shell:
| Main Power Cabinet | Furnace Shell | Reducer | Water Cooled Cable | Crucible Mould | Induction Coil |
 |  |  |  |  |  |
6. Large Induction Melting Furnace Packaging:
As for packing of KGPS induction melting furnace:
wooden / plywood cases and the furnace is packed with wrapping film
and the case is filled with foam,for waterproof and shockproof.
As for shipping of KGPS induction melting furnace:
1. If you have a shipper in China, we can send the machines to him
or her for free.
2. If you want us to send the machines to you directly, we can send
them to any main port of China promptly.
