Ultra Glossy Stainless Steel Plates-PVC Card Material for Card
Lamination
1.Ultra Glossy Stainless Steel Plates-PVC Card Material for Card
Lamination- Introduction:
Ultra Glossy Stainless Steel Plates-PVC Card Material for Card
Lamination MSP-G are used for laminating plastic card sheets in the cad laminator.
It can ensure perfect plastic card surface finish after lamination.
Our plates are being widely used by many card factories in both
China and foreign countries worldwide.
Key Features:
1). The two sides are covered with protection foils (blue thin
films) to ensure good protection on both surfaces. There is no glue
left after the foil is removed before the plate is used at the
first time.
2). Two sides are made glossy in the same quality.
3). There are no scratches, dents, stripes shadows and dust on
plate surfaces.
4). The edges are smooth and deburred with the round curved
corners.
5). After lamination, the plates are not sticking to the laminated
plastic sheets.
2.Ultra Glossy Stainless Steel Plates-PVC Card Material for Card
Lamination- Parameters:
Technical Parameters:
Plate size(L×W): A4, A3 or custom-made size
Plate thickness: 0.6mm, 0.8mm (Thickness tolerance: ±0.05mm)
Dimension tolerance: ±1mm for length and width.
Plate flatness level: maximum 1 mm
Surface roughness: Glossy plate (Ra＜0.03μm)
Glossy plate surface glossiness: over 800 GU at 20° (both sides)
Surface hardness: HRC80±20
Thermal transmission: 0.04cal/℃.cm.sec at 20℃
Packaging box: solid plywood carton with soft cushion protection
inside.
| surface roughtness Ra value | Ra＜0.03μm |
| Thickness range | 600 or 800 micron |
| Dimension tolerance | ±1mm |
| Plate size(L×W) | A4, A3 or custom-made size |
| Plate flatness level | maximum 1 mm |
| Glossy plate surface glossiness | over 800 GU at 20° (both sides) |
| Surface hardness | HRC80±20 |
| Thermal transmission | 0.04cal/℃.cm.sec at 20℃ |
| Edge state | smooth and deburred with the round curved corners |
| Packaging box | solid plywood carton with soft cushion protection inside. |
3.Ultra Glossy Stainless Steel Plates-PVC Card Material for Card
Lamination- Application
Steel plate based in good raw material, use the advantage of good
conducting of heat, resisting pressure, high quality mirror. By our
steel plates you can produce the international standard card.
We have 7 kinds of steel plates finish,for different lamination
purpose:
1).Glossy steel plates
normal mirror effect,for planographic code and inkjet code.
2).Matte steel plates
on te surface there are tiny lights,thin and lubricious,for
planographic code and inkjet code.
3).High matte steel
Platoon lights on the surface,too coarse for planographic code.
4).Moderate coarse/ middle matte steel plates
no lights on the surface,moderate coarse.
5).Fine matte steel plates
no lights on the surface, relatively thin and lubricious, for
paleographic code and inkjet code.
6).Pattern steel plate
Kinds of patterns for personalization cards lamination
7).Silk steel plate
For personalization card laminations
Features:
1.Card laminator Accessories ,High-grade stainless stee
2.800 Micron thickness
3.Characteristic: heat-resistant, high elasticity
Used in Laminator
4.Ultra Glossy Stainless Steel Plates-PVC Card Material for Card
Lamination- Packing
Wood Tree Texture Double Side Laminating Steel Plate for Card
Making / Stainless Steel Plate Press on Cards in standard export
wooden case
