Armature Plunger K0850 Φ11.3 SCG353A043 SCG353A044 Pulse Valves
Series Armature Plunger K0850 Φ11.3 includes O-ring, armature
assembly, armature spring, ferrule.
The product is developed to be used in ambients with temperature
range from –10°C to +80°C
The armature assembly is designed for more than 50x106 cycles.
Specifications:
Plunger and core are made by a magnetic stainless steel specially
designed for solenoid applications.
The plunger is normally equipped with NBR rubber seals. Other
materials like FKM are available upon request. The armature
assembly is designed for more than 50x106 cycles.
The guide tube is made with brass (stainless steel is possible upon
special agreement).
1 . The pulse diaphragm valves are especially designed for dust
collector service applications, combining high flow, long life and
extremely fast opening and closing to produce reliable and
economical operation.
2 . The high flow, angle type bodies in combination with the
special main diaphragm assemblies give the unique operating
features required for dust collector service applications
3 . The design with integral compression fittings will facilitate
installation because there is no need for threaded piping
4 . The high quality diaphragms are reinforced and wear resistant
to guarantee a long operating life, even under harsh conditions
5 . Integral pilot operated valves satisfy all relevant EC
directives
General Data:
Ambient temperature ············································· -
10 °C to + 80 °C
Quality of medium according to ISO 8573-1 ·········· compressed air
class 4, 3, 4
Mounting position
·················································· any ( preferably
plunger in vertical direction )
Technical Data:
GENERAL
Differential pressure 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range -20 to +85°C
fluid (✷) | temperature range (TS) | diaphragm (✷) |
air | -20 to +85°C | CR (chloroprene) |
ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connector Spade plug (cable Ø 6 - 10 mm)
Connector specification ISO 4400 / EN 175301-803, form A
Electrical safety IEC 335
Standard voltages DC (=): 24V
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL
will be normal ways. If you require use of a courier, we can do it.
FAQ
1. When your company establish?
Airwolf Automation Was established in 2010, we have been working in
agrochemical field for about 26 years, we have a professional
production of process, committed to providing customers with the
most satisfactory service.
2. Are you a trader or manufacturer? Do you have factory?
We are a solenoid valve manufacturer, we have the ability of mass
production . we have our own developing and designing team, which
ensure our own technological and specific products for customers.
3. Where’s your factory located? Can we visit your factory?
Our company is in Xikou town,Fenghua city,Zhejiang Province,
China,Which is near by Ningbo city,
Customers will be always welcomed to visit our company and our
factories.Please contact us your schedule,we will arrange to pick
up you and visit our factory.
4. How do you make the quality guarantee?
We have our own quality control center, we have advanced equipments
for the inspections. We can guarantee every product will be tested
after production.
5. Can you support the specific productions?
We can design and develop the products of customer's requirement,
if you have the specific products, please send us a sample, we will
develop it for you.
6. What's the transportation service?
Usually, we will be according your address, choose the fastest and
cheapest way, the DHL,TNT,Fedex or China post express all can
support.
