K4007 FKM CA40DD CA40MM CA40T pulse solenoid valve diaphragm seals
kit
Ordering Code: K4007 (M1156)
Material: FKM
FKM material diaphragm working temperature: -20~200°C
K4007 is used for CA40T CA40DD CA40MM RCA40T RCA40DD RCA40MM type
pulse valve
Quick Details :
1.Long life
2.High Quality.
3. We have gained the CE and ISO 9001
4.We have complete after-sales service.
5.We have many experience in this area.
Welcome cooperate with new and old customers future!
Installation
For your safety do not pressurise system until all valves and pipes
are fully secured. Do not attempt to remove a fitted valve while
system is under pressure.
1. Prepare supply and blowtube pipes* to suit valve type and
specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes (or flanges, tighten bolts to 10Nm)
and blowtube to valves, ensuring no excess thread sealant can enter
the valve itself. Ensure blowtube is fully inserted into the valve
outlet.
5. Tanks and pipes must be independently restrained from FS and DD
valves.
6. Connect RCAC pilot port to remote pilot valve, or install
MIP/3DS screw in pilot valve.
7. Apply moderate pressure to system and check for installation
leaks.
8. Fully pressurise system.
9. Test fire and listen for proper actuation and crisp pulse noise.
Valve is not a structural component. Do not rely on valve to retain
tanks or pipe. Refer to Camlock product specifications for
installation details.
Competitive Advantage:
| Our product features: | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging, | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment.
|
FAQ
1. When your company establish?
Airwolf Automation Was established in 2010, we have been working in
agrochemical field for about 26 years, we have a professional
production of process, committed to providing customers with the
most satisfactory service.
2. Are you a trader or manufacturer? Do you have factory?
We are a solenoid valve manufacturer, we have the ability of mass
production . we have our own developing and designing team, which
ensure our own technological and specific products for customers.
3. Where’s your factory located? Can we visit your factory?
Our company is in Xikou town,Fenghua city,Zhejiang Province,
China,Which is near by Ningbo city,
Customers will be always welcomed to visit our company and our
factories.Please contact us your schedule,we will arrange to pick
up you and visit our factory.
4. How do you make the quality guarantee?
We have our own quality control center, we have advanced equipments
for the inspections. We can guarantee every product will be tested
after production.
5. Can you support the specific productions?
We can design and develop the products of customer's requirement,
if you have the specific products, please send us a sample, we will
develop it for you.
6. What's the transportation service?
Usually, we will be according your address, choose the fastest and
cheapest way, the DHL,TNT,Fedex or China post express all can
support.
