SCG353A043 G3/4" SCG353A044 G1" Right-angle integral pilot air
pulse valve
FEATURES
• The pulse diaphragm valves are especially designed for dust
collector service applications, combining high flow, long life and
extremely fast opening and closing to produce reliable and
economical operation
• The high flow, angle type bodies, springless construction, in
combination with the special diaphragm assemblies give the unique
operating features required for dust collector service applications
• The design with integral compression fittings will facilitate
installation because there is no need for threaded piping
• Built-in silencers guarantee noise free operation and avoid
foreign particles entering the valve
• The integral operators are provided with epoxy moulded F-class
coils. Various optional waterproof and explosionproof solenoids for
use in potentially explo- sive atmospheres (gas & dust) according
to Directive ATEX 94/9/EC can be mounted on the same basic valve
(see page 45 till 52)
GENERAL
Differential pressure (PS) 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range -20 to +85°C
CONSTRUCTION
Body Aluminium
Core tube Stainless steel
Core and plugnut Stainless steel
Core spring Stainless steel
Sealings & disc NBR (nitrile / buna-n)
Diaphragm TPE (hytrel)
Shading coil Copper
Coil insulation class F
Connector Spade plug (cable Ø 6 - 10 mm)
Connector specification ISO 4400
Electrical safety IEC 335
| catalogue number | A | B | C | D | E | F | G | H | J | K | weight |
| SC(DU) G353A043 | 75 | 45 | 27 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0,7 |
| SC(DU) G353A044 | 75 | 45 | 27 | 51 | 89 | 75 | 39 | 92 | 113 | 130 | 0,65
|
OPTIONS
● Waterproof enclosure with embedded screw terminal coil according
to protection class IP67, CEE 10
● Explosionproof solenoids for hazardous locations according to
“ATEX” and national standards
● Explosionproof and watertight solenoids according to “NEMA”
standards
● Compliance with “UL” standards
● Plug with visual indication and/or peak voltage suppression
● Electronic timer
● Valves can also be supplied with FPM (fluorelastomer /
fluororubber) diaphragm and sealings. Use the appropriate optional
suffix letter for identification
INSTALLATION
● The valves can be mounted in any position without affecting
operation
● Pipe connection identifier is: G = G (ISO 228/1) or compression
fitting
● For compression fitting types tightness is achieved by the
compressed gasket on the blow tube
● The use of the rubber gaskets as sealing members will allow a
slight misalignment in piping when using compression fittings
● Other pipe threads are available on request
● Installation/maintenance instructions are included with each
valve
● Spare Parts Kit and replacement coils are available
Competitive Advantage
Our product features Our Services Guarantee:
1) Competitive price 1) Prompt respond (Reply with 24 hours)
2) Good quality 2) Free Samples (Customer pay for the delivery
cost)
3) Professional Packaging 3) Registration support.
4) Produce according to Customers’ instruction 4) Photos/videos are
available during production.
5) None delay shipment 5) Loading inspection, and send loading
photos before shipment.
Serves time
0:00 - 23:59
From Monday to Sunday
