Automatic pedestrian waist heogjt green and red color LED light 304
stainless steel security flap gate barrier
Flap Barrier Advantage:
1. Problem-self-checking function.
2. Passing direction: Bi-direction
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, flap can be delayed
to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger doesn’t
pass within regulated time, turnstile
will cancel order automatically. And the regulated time can be set
by managers.
6. Anti-rush function: if there is no open single, arm will be
locked tightly.
7. Stable running with little noise.
ABOUT SINOMATIC FLAP BARRIER GATE SYSTEM
Flap turnstile is an intelligent channel device, which can easily
integrate IC card, ID card, QR code, fingerprint, face and other
recognition devices, and can realize the intelligent and efficient
management of the channel; it adopts bridge-type high-end arc
design and elegant appearance It is mainly used for the management
of the entrance and exit of the passage, which has the
characteristics of safety, convenience, prevention of illegal entry
and exit, and rapid control of free passage in emergency
situations.
Parameters:
| Working Voltage | AC220V±10V / AC110V±10V |
| Operating Temperature | -20 to 60°C |
| Humidity | <95%, without concretion |
| Passage Width | 600mm |
| Communication Interface | RS485 (Distance: <=1200m) |
| Passing Speed | 40 persons/min (normal open), 30 persons/min (normal close) |
| Flap length | 270mm |
| Housing Dimension | 1200*300*1000mm |
| Arm Open/Close Time | 0.2s |
Features of Flap Barrier Gate
1.With fault self-test and alarm prompt function, convenient for
user maintenance and use.
2.Through the built-in small push-pull on the main control board,
device operating state can be programed.
3.The mechanical structure has anti-pinch and anti-collision
function. When the swing arm is blocked during the reset process,
the motor automatically stops working within the specified time.
Reset again after the default delay (until reset), and the force is
very small (≤ 2kg).
4. Illegal intrusion, trailing alarm, reverse intrusion gate
automatically closes
5.Anti-shock function, the arm is automatically locked when no open
signal is received.
6.Telescopic arms are adjustable synchronously (for double
pendulum)
7.With automatic reset function. After the switch is opened, the
system will automatically cancel the user's permission for the pass
when there is no pass within the specified time.The reset time is
adjustable from 1s to 60s (the system default time is 10s). After
the power is cut off, the channel is automatically opened (in
accordance with fire protection requirements), and the power-on
channel is automatically closed.
8.Infrared sensor reset, infrared sensor anti-trap function
(configure 5 pairs of infrared)
9.It can be connected with a variety of devices such as access
control systems, consumer systems, electronic ticket systems,
biometric systems, and electrostatic testers.
10.The one-way or two-way control personnel can enter and exit, and
the infrared sensing in and out channels.
11.Voice prompt function.
12.Remote control and management can be achieved directly through
the management computer.
