1000W 1500W Automatic Prismatic Lithium Battery Pack Aluminum
Nickel Busbar Fiber Continuous Laser Welding Machine
Introduction
Laser welding is an efficient and precise welding method which uses
high energy density laser beam as heat source.
Laser welding is one of the important aspects of laser material
processing technology. The welding process belongs to the heat
conduction type, the laser radiation heats the workpiece surface,
and the heat on the surface diffuses through the heat transfer
guide. By controlling the width, energy, peak power and repetition
frequency of laser pulse, the workpiece is melted to form a
specific molten pool.
Laser welding is a new type of welding method. Laser welding mainly
aims at the welding of thin-walled materials and precision parts,
which can realize spot welding, butt welding, stack welding, seal
welding, etc..
Feature
Output fiber laser power stability, electro-optical conversion rate
up to 30%, its conversion rate is 10 times of YAG.
Beam quality is excellent, non-Gaussian light, multi-module fiber
transmission.
Maintenance-free operation.
Low cost of use, almost no consumptive material, daily
maintenance-free,reducing the cost of debugging when production
line stops.
Long lifetime, high precision, pump source lifetime more than
100,000 hours.
Application
Welding of automobile parts, hydraulic lever, gasoline filter,
automobile tail gas sensor, solenoid valve and start motor stator,
and seal welding lithium battery (mobile phone battery and energy
battery), metallurgy (welding of silicon steel plate), military
industry sensor, motor blade welding electronic components, welding
of (relay) electric apparatus industry, silicon steel plate, air
conditioner motor rotor, leakage protector. Widely used in
aviation, machinery, electronics, communication, energy, chemical,
automobile manufacture.
Parameter
| Model No. | CY-WD1000 |
| Laser Power | 1000W |
| Laser Source | Fiber 1080nm |
| Optical Connector | QBH |
| Modulation Frequency | <10 k Hz |
| Max Welding Depth | ≤3mm |
| Adjusting rang of light spot | 0.2 - 2.0mm |
| Cooling System | 1HP water chiller |
| Power Supply | 220V±5%, 50Hz |
| Power Consumption | 5Kw |
| Fiber Delivery Length | 10 meters |
| Observing System | CCD and LCD display, with red pointer |
| Control System | Industrial PC with CNC 2000 or LC5 |
| 3-axis Travel Distance | X=300mm,Y=200mm,Z=300mm (all electrical, precision ±0.02mm) |
|
| Data Memorization | 100 groups |
| Illumination | LED circle lamps |
| Language Display | English & Chinese |
| Shield Gas Supply | 1line, argon |
| Running Environment | Tem 5°C-40°C, Hum 5%-85% |
