LSW-16 16kw IGBT electric high frequency Induction copper brazing
machine
1. Induction Brazing Machine Brief Introduction :
Induction brazing is a process in which two or more materials are
joined together by a filler metal that has a lower melting point
than the base materials using induction heating.Brazing is a
materials joining process that uses a filler metal (and usually an
anti-oxidizing solvent called flux) to join two pieces of
close-fitting metal together without melting the base materials.
Instead, induced heat melts the filler, which is then drawn into
the base materials by capillary action.
high frequency induction heating equipment is particularly suitable
for heat treatment and quenching, melting, annealing, the metal
through the heat forging, extrusion, welding, brazing.
2. Technical Parameters of LSW-16 Induction Heating Machine:
| Model | LSW-16 |
| Working Voltage | 220V, 50/60HZ |
| Max input power | 16kw |
| Oscillation frequency | 28-40KHZ |
| Duty cycle | 100% |
| Cooling water flow | 20L/Min,0.15-0.2MPa |
| Weight | 25kg |
| Dimension (L*W*H ) | 420*200*360mm |
| Material | stainless steel |
| Color | support customized |
| Usage | metal heating, brazing,melting etc |
3. Main characteristics of LSW-16 Induction Brazing Machine :
Induction brazing can join a wide range of metals, even ferrous to
non-ferrous. Induction brazing is precise and quick. Only narrowly
defined areas are heated, leaving adjacent areas and materials
unaffected. Correctly brazed joints are strong, leak-proof and
corrosion resistant. They are also very neat, usually requiring no
further milling, grinding or finishing. Induction brazing is ideal
for integrating into production lines.
4. Induction Brazing Machine Application:
Heat treatment industry
1. a variety of steam, Motorcycle high-frequency hardening heat
treatment, such as: crankshaft, connecting rod, piston pin,
camshaft, valves, various gears within the gearbox, a variety of
fork, all kinds of spline shaft, drive axle, various small shaft
crank pin, a variety of rocker, rocker shaft, high-frequency
hardening heat treatment.
2. the hardware high-frequency hardening heat treatment, such as
pliers, hammers, strong pliers, wrenches.
3. hydraulic components such as: piston pump plunger, rotor pump
rotor, conversion shaft of the valves, gear of gear pump high
frequency quenching.
4. various electric tools gear shaft of the high-frequency
hardening heat treatment.
5, a variety of carpentry tools, such as: axes, planing and other
heat treatment.
Forging industry
1. plate heating, bending and forming.
2. standard parts, fasteners through the hot forming.
3. the hardware tools through heat, such as pliers, wrenches and
other heat through hot forming.
4. taper shank drill rod extrusion prospecting.
5. the pipe through the hot forming, such as bends and so on.
Brazing
1. carbide cutting tools welding. Such as turning, milling, cutter
knife.
2. the diamond saw blade welding. Such as diamond saw blade,
abrasive, jagged welding. Exploration drill bit used in welding,
such as word drill, drill welding horns.
3. brass, copper
Smelting
Steel,iron, non-ferrous metals,graphite crucible smelting
