Product Name:
M6000-1002450A Belt Tensioner ,Yuchai Engie / Yutong Bus,Matching
For Original Factory .
Material: ALUMINUM
Product Details:
| Product Name |
Belt Tensioner |
Oem No.
| M6000-1002450A |
Truck Model
| Yutong |
Engine Model
| Yuchai Engine |
Material
| Aluminum |
Specification:
| Based on customer |
Payment
| T/T,L/C ,Western Union
|
Tensioning wheel working principle:
The tensioning wheel releases the torque of the pre-tightened plane
vortex spring or cylinder torsional spring in the process of
working to achieve the purpose of automatically tensioning the
accessory belt.
Specification for installation of automatic tensioning wheel:
1, scope,
This specification is applicable to the operation of the automatic
tensioning wheel Assembly during installation.
2. Installation steps of abnormal tensioning wheel:
(1)Install and fix the tensioning wheel with M10 countersunk bolt;
(2)The recommended tightening torque of the bolt is :(50±5)N m;
(3) Use a spanner to pull the tensioning wheel arm to the maximum
corner;
(4) in a reasonable order will be around the belt pulley, and
maintain the correct position;
(5)Slowly loosen the tensioning wheel arm and make it tighten the
belt.Pull out the spanner;
The diagram below:
3. Installation steps of the same direction tensioning wheel:
(1) Install and fix the tensioning wheel with M10 flange face
bolts;
The tightening torque of the bolt is recommended to be 50±5N m;
(3) Use the square hole spanner to pull the tensioning wheel arm to
the maximum corner;
(4) in a reasonable order will be around the belt pulley, and
maintain the correct position;
(5)Slowly loosen the tensioning wheel arm and make it tighten the
belt.Pull out the spanner. OK.
The diagram below:
4,Points to note during installation of tensioning wheel:
(1) The belt wedge must be in the corresponding slot of the belt
pulley;
(2) Check whether the positioning block of the tensioning wheel arm
is close to the free position after tensioning the belt. If it is
at a small Angle close to the free position, please replace the
belt.
(3)When the tensioning wheel is disassembled, follow the steps.
FAQ:
Q : When can I get the price?
A : We usually quote within 24 hours after we get your inquiry. If
you are very urgent to get the price, please tell us by E-mail,so
that we will regard your inquiry as the first priority.
Q : How can I get a sample to check your quality?
A :After price confirmation, you can require for samples to check
our quality.
Q : Can you do the design for us?
A :Yes. We have a professional team with rich experience in
packaging box design and manufacturing. We can manufacture the
products as per your requirements.
Q : How long can I expect to get the sample?
A :It will be ready for delivery in 7-10 days. The samples will be
sent to you via express and arrive in 3-5 days.
Q : What about the lead time for mass production?
A :Usually 30-45 days after you confirm the PP sample and we
received your deposit.
