STM32F429ZIT6TR Electronic Integrated Circuits ARM Microcontrollers - MCU STMicroelectronics
1.Features
Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time
accelerator (ART Accelerator™) allowing 0-wait state execution from
Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25
DMIPS/MHz(Dhrystone 2.1), and DSP instructions
Memories
Up to 2 MB of Flash memory organized into two banks allowing
read-while-write– Up to 256+4 KB of SRAM including 64-KB of CCM
(core coupled memory) data RAM– Flexible external memory controller
with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact
Flash/NOR/NAND memories
•LCD parallel interface, 8080/6800 modes
•LCD-TFT controller with fully programmable resolution (total width
up to 4096 pixels, total height up to 2048 lines and pixel clock up
to 83 MHz)
•Chrom-ART Accelerator™ for enhanced graphic content creation
(DMA2D)
•Clock, reset and supply management– 1.7 V to 3.6 V application
supply and I/Os– POR, PDR, PVD and BOR– 4-to-26 MHz crystal
oscillator– Internal 16 MHz factory-trimmed RC (1% accuracy)– 32
kHz oscillator for RTC with calibration– Internal 32 kHz RC with
calibration
•Low power– Sleep, Stop and Standby modes–VBAT supply for RTC,
20×32 bit backup registers + optional 4 KB backup SRAM•3×12-bit,
2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved
mode•2×12-bit D/A converters•General-purpose DMA: 16-stream DMA
controller with FIFOs and burst support
•Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to
180 MHz, each with up to 4 IC/OC/PWM or pulse counter and
quadrature (incremental) encoder input
Debug mode
– SWD & JTAG interfaces– Cortex-M4 Trace Macrocell™•Up to 168 I/O
ports with interrupt capability– Up to 164 fast I/Os up to 90 MHz–
Up to 166 5 V-tolerant I/Os•Up to 21 communication interfaces– Up
to 3 × I2C interfaces (SMBus/PMBus)– Up to 4 USARTs/4 UARTs (11.25
Mbit/s, ISO7816 interface, LIN, IrDA, modem control)– Up to 6 SPIs
(45 Mbits/s), 2 with muxed full-duplex I2S foraudio class accuracy
via internal audio PLL or external clock– 1 x SAI (serial audio
interface)– 2 × CAN (2.0B Active) and SDIO interface
•Advanced connectivity– USB 2.0 full-speed device/host/OTG
controller with on-chip PHY– USB 2.0 high-speed/full-speed
device/host/OTG controller with dedicated DMA, on-chip full-speed
PHY and ULPI– 10/100 Ethernet MAC with dedicated DMA: supports IEEE
1588v2 hardware, MII/RMII
•8- to 14-bit parallel camera interface up to 54 Mbytes/s
•True random number generator
•CRC calculation unit•RTC: subsecond accuracy, hardware
calendar•96-bit unique ID
2.Why choose us?
100% new and originao with Advantage price
High efficiency
Fast Delivery
Professional team service
10 Years Experience Electronic components
Electronic components Agent
Advantage logistic discount
Excellent After-sales Service
