CA50T G2 Inch Nitrile Seals Normal Temperature pulse valve
Description
High performance diaphragm valve with threaded ports. Available
with integral pilot or as remotely piloted valve. Outlet at 90° to
inlet.
Suitable for
Dust collector applications, in particular for reverse pulse jet
filter cleaning including bag filters, cartridge filters, envelope
filters, ceramic filters, and sintered metal fibre filters.
Construction
| Body | Aluminium (diecast) |
| Ferrule | 304 SS |
| Armature | 430FR SS |
| Seals | Nitrile or fluororubber (reinforced) |
| Spring | 304 SS |
| Screws | 302 SS |
| Diaphragm Seat | PA-6 (standard), fluororubber coated mild steel or High Density PE
Refer to Q Series Solenoid product data sheet for solenoid
construction details. |
Operation
Recommended on time range: 50-500ms
Recommended time between pulses: 1 minute or greater
Maintenance
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled. Diaphragm and pilot inspection
should be conducted annually.
Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C(179.6°F) fluororubber Seals:
-29°C (-20.2°F) to 232°C (449.6°F)
Weights:| Size | Integral Pilot (CA) Kg (lbs) | Remote Pilot (RCA) Kg (lbs) |
| 50 | 2.89(6.38) | 2.68(5.92) |
Maintenance Kits
| Model | Nitrile | fluororubber | Low Temperature -60°C (-76°F) Min. | Includes |
| CA/RCA50/62T | K5004 | K5000 | NA | Diaphragm kits include main and secondary diaphragms (where
required) and all springs.These kits are for discontinued valves.
o-ring, armature assembly, armature spring, ferrule |
| Pilot repair kit | K0380 | K0384 | NA |
4.Product Characteristics and Performance:
| Item Code | Nom. Size | mm | Port Size inch | Number of diaphragms | Kv | Flow Cv |
| CA/RCA-10T | 10 | 10 | 3/8 | 1 | 2.5 | 2.9 |
| CA/RCA-20T | 20 | 20 | 3/4 | 1 | 12 | 14 |
| CA/RCA-25T | 25 | 25 | 1 | 1 | 20 | 23 |
| CA/RCA-35T | 35 | 40 | 1.5 | 1 | 36 | 42 |
| CA/RCA-45T | 45 | 40 | 1.5 | 2 | 44 | 51 |
| CA/RCA-50T | 50 | 50 | 2 | 2 | 76 | 88 |
| CA/RCA-62T | 62 | 62 | 2.5 | 2 | 91 | 106 |
| CA/RCA-76T | 76 | 76 | 3 | 2 | 144 | 167 |
5.Dimension(mm and inch):
Installation
1. Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot
port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation
leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We
will contact suppliers or Manufactory for Warranty. Buyers Might
Need to pay the Shipping fee For resend the replaced item.
