Glass Deep Processing ALL IN ONE CNC Full Automatic Glass Cutting
Machine / Glass Cutter Table for Sale
Brief Introduction
The machine with double side loading arms, Small footprint, not
only suitable for the factory but also suitable for store
operations, linear cutting and shaped cutting in one, Remote
control command operation, one set machine with 3 machine’s
functions, can replace the expensive automatic glass cutting line,
reducing the use of equipment Comprehensive cost, It is the best
choice of glass processing enterprise.
Machine Features
1) The Machine set automatically glass sheet uploading,
automatically cutting, automatically breaking pieces, floating in
one, and free to walk through the remote control command in the
factory area.
2) Adopt Import optimization software reduces the loss of the
glass.
3) With automatic correction. To ensure cutting accuracy.
4) Special-shaped cutting: the equipment can be used to
automatically cut any straight line, slash or contour with high
precision.
5) English(Chinese) operation interface: Man-machine dialogue adopt
full English(Chinese) menu.
Technical Parameters
| Item No. | Parameters | Data | Mark |
| 1 | Max cutting size | 3800*2600mm | Customized |
| 2 | Cutting Glass thickness | 2-22mm | |
| 3 | Line Parallelism | <0.2mm/m | |
| 4 | Diagonal precision | <0.2mm/m | |
| 5 | Machine table hight | 900mm | |
| 6 | Max loading raw glass size | 3800*2600mm | |
| 7 | Mini loading raw glass size | 1800*1000mm | |
| 8 | Cutting Precision | <0.2mm/min | |
Product Applications
Building glass, automotive glass, craft glass, round piece of
glass, decorative glass, ambry glass, coated glass, appliance
glass, bathroom glass, lenses handicraft glass, solar glass,
kitchen utensils and appliances, spell mirror glass, etc.
More Details
Air-floated Breaking Table for Glass Cutting
It is mainly composed of four parts: frame mechanism, splitting
mechanism, pneumatic control system and electrical control system.
* Sheet size: Min size: 1500 *1200mm (Single Side loading) * Max
loading size: 2600 x 2000 mm * Glass sheet thickness: 3 ~ 19mm *
Working absorption depth: 700 mm * X-axis walking speed: 5-25m/min
(adjustable) * Y-axis walking speed: 8-12 m/min (adjustable) *
Conveying speed: 5-25m/min (adjustable) * Number of flip arms: 8
arms (double side loading) * Number of single arm suckers: three *
Loading type: Double side loading * Working cycle: 45S (15S for
each additional position) * Installation power supply: AC380V/50HZ
(special circumstances can be adjusted according to customer
requirements) * Installation total power: 5-10 kw * Compressed air:
0.6-0.8 Mpa; * Vacuum: -50-99 Kpa (adjustable according to glass
thickness) * Working table height: 900 + 20mm * Machine size: 4650
x 2980 x 900mm
Fully Automatic CNC Glass Cutting Machine
Its working principle is to convey the cut glass by conveying the
belt to the worktable, automatically input the position of glass
through photoelectric scanning system, and then the cutting head
with a diamond wheel on the cutter holder moves along X and Y
directions respectively by program control, cuts the sheet. The CNC
motion controller is used in the control part of the machine, and
an advanced AC servo motor is used in the drive part. * Max size:
2600*2000mm * Thickness:3～19mm * Cutting accuracy:±15 * Cutting
accuracy of special-shaped glass:±20 * Cutting speed:0-200m/min *
Conveying speed:0-25m/min * Machine size:9600X2800X900±20mm *
Working table height:900mm±20mm * Weight:2600kg * Total power of
equipment:5-8kw
Fully Automatic Glass Loading Table
It is mainly used for automatic glass loading. After putting the
glass in the designated position and giving the signal of loading,
the big arm turns up about 95 degrees through the overturning
mechanism, and the whole machine starts to move forward. When the
induction device on the small arm touches the glass, the whole
machine stops walking and the glass is sucked by the suction cup
through the vacuum system on the glass, small arm lifting motor
lifts the glass upward and backward about 80 mm. The walking motor
retreats and the big arm falls down. When the big arm is in place,
the suction cup under the glass begins to blow. When the small arm
falls down, the glass falls on the conveyor wheel. Finally, the
glass is conveyed to the cutting table by the conveyor wheel. *
Breaking bar: 1+1 type * Table Size: 9600x2800x900mm * Glass
thickness:3-19mm * Power: 4kw * Table height: 900 + 20mm
