Adult Kids Baby Object Surface Temperature Thermometer Memory Function

Product parameter

Packing

Unit Size:170*116*55mm

Net Weight:150g(without batteries)

Carton Size:605*360*295mm 50pcs/carton

Carton Weight:8.65kg

Precautions

1. Please read the instructions for use before the measurement, and the forehead should be kept dry, and the

hair should not cover the forehead (please perform the measurement in an environment of 10℃-40℃) to ensure

the accuracy of the measurement.

2. The forehead temperature measured quickly by this product is for reference only and should not be used as

a basis for medical judgment. If any abnormal body temperature is found, please use a medical thermometer

for further measurement.

3. Please protect the sensing lens and clean it in time. If the changing environment temperature changes too

much, you need to place the measuring instrument in the environment you want to measure for 20 minutes,

and wait for it to stabilize to adapt to the environment temperature before using it to get a more accurate value.

Operation Instrctions

1.Switch between body and object temperature mode

when in measurement mode,press the “SET”key to switch between the object temperature measurement

mode(the display shows a small house) and the human body temperature measurement mode(the display

shows the child's smiling face)

• Look up the measured historical data

In the shutdown state,press the “MEMO” key to view the last first measured data,and press it again to view

the last second data.The thermometer can store 32 sets of data measured in the human body temperature

measurement mode.Press the “POW”key to exit the look up.

• Set parameters of the themometer

• Turn sound on an off

In the shutdown state,press and hold the “SET”key to 3 seconds until the screen lights up.in F1 mode,press

“MEMO” to select on or off.Press “POW” to exit the setting.

• Set the temperature abnormal alarm threshold

In F1 mode,lightly press “SET” button to enter F2 mode,in this state,press “MEMO” button to set the temperature.

Press “POW” to exit the setting.

• Set temperature compensation

In F2 mode,lightly press “SET” button to enter F3 mode,

press press “MEMO” button to set the temperature compensation.This operation is more professional,it is

recommended to keep the factory default settings and set the value to zero.Press “POW” to exit the setting.

• Switch between Celsius/Fahrenheit temperature units

In F3 mode,lightly press “SET” button to enter F4 mode,press

“MEMO” key to set the temperature unit(Celsius/Fahrenheit switching selection).

Features

• HD LCD Screen
• Non Contact Measuring
• One Second Reading
• Body and Surface Mode
• 32 Record Storage
• ℃/℉ Conversion
• Fever Alarm
• Voice On/Off

FAQ

Q1:The device is on (the screen is measured),but the temperature cannot be measured.

A1:Confirm whether the product enters the measurement data viewing mode or parameter setting mode.

If you under this mode,please press the power button(POW key) to shut down(or wait 1 minute to automatically

shut down),and then press the temperature measurement key after rebooting.

Q2:The temperature measurement is obviously too low

A2:Confirm whether the device is under the object temperature measurement mode.If so,press the SET key

once to enter the human body temperature measurement mode.Enter the parameter setting mode and check

whether the temperature compensation setting is negative.It is recommended to set the value to 0.

Q3:The measurement temperature is obviously too high

A3:Enter the parameter setting mode and check whether the temperature compensation setting is positive.It is

recommended to set the value to 0.

Hunan Zhongliankang Medical Technology Co., Ltd., subsidiary of Yufing Group, was founded in February, 2020, its manufacturing center is located in Jiuhua Economic Development Zone, Xiangtan, Hunan, China, covering an area of 4000 Square Meters. Equipped with international scientific R&D and production equipment and the leading simulation laboratory, it has built a one-stop service of R&D, manufacturing and marketing of various medical devices like Infrared Thermometer, Electronic Thermometer, Disposable Body Bag, Pulse oximeter, etc., successfully have created self-brand CARE4U. All CARE4U medical products are FDA approved, CE certified, RoHS compliant, are widely popular in the global market. With a stronger support from our parent company Yufing Group, the company has been making his contribution to sustainable development of medical technology and products.