Baby Adult Digital Gun Type Non-Contact Infrared Forehead
Thermometer
Product Advantages
Non-contact:
Non contact guarantees the best hygiene, thereby greatly reducing
the risk of being infected by bacterial viruses.
Efficient & Accurate:
Simple operation, non-contact, sensitive, no need to wait accurate
measurement
Best Infrared Sensor:
Self-developed infrared module, accuracy up to 0.1 ºC, stable,
fast, accurate, strong adaptability, 5.5um
infrared filter, a wider measurement range
Smart Power Saving:
Support automatic shutdown, two AAA batteries can be used for over
3000 times.
| Model | ZLK-IRT101 |
| Display resolution | 32.2℉/ 0.1℃ |
| Body temperature mode | ±32.36℉ / ±0.2℃ |
| Measuring range | ( 89.6℉ ~ 107.6℉ ) /( 32℃~42℃ ), body mode; ( 32℉ ~ 212℉ ) /(
0℃~100℃ ), object mode |
| Measuring distance | 1-10cm |
| Operating ambient temperature | ( 50℉ ~ 104℉ ) /( 10℃~40℃ ) |
| Operating ambient humidity | ≤80%RH |
Storage temperature range Reading memory storage | ( -13℉ ~ 131℉ ) /( -25℃~55℃ ) 32 groups |
| Power | DC3V |
| Battery | 2X AAA alkaline dry battery |
| IP rating | IP20 |
| Dimension | 116x55x170mm (LxWxH) |
| Weight | 150g ( without battery ) |
| Validity | 3 years |
User Instruction
Hold the NCIT sensing area perpendicular to the forehead and
instruct the person to remain stationary during measurement.
The ideal measure distance between the NCIT and forehead is about
3~5cm.
Do not touch the sensing area of the NCIT and keep the sensor clean
and dry.
Quality Control
Incoming quality inspection
Quality inspection of all assembly and procurement materials
according to standards
Reliability test
a. Component stress test
b. Hardware reliability test
c. Automated software reliability test
d. Real environment simulation test
Process control: mutual check process in assembly line
a. Process quality management
b. Independent inspection by operators
c. Process inspection
d. Handling abnormal quality
e. Segmentation and identification of bad products, bad statistics
Maintenance and precautions
Please keep the sensor and probe chamber clean, otherwise it will
affect the accuracy of measurement.
Cleaning methods:
Surface cleaning: wipe the dirt with clean soft cloth or cotton
silk with a little medical alcohol or water.
Sensor and chamber cleaning: gently wipe probe chamber or sensor
top with clean soft cloth or cotton stick with a little medical
alcohol. It can only be used after the alcohol is fully utilized.
Before using, please read the instructions carefully and make sure
that the battery is installed .
It is forbidden to immerse the thermometer in any liquid. It is
forbidden to keep the thermometer in excessive high or low
temperature for a long time.
Do not disassemble the thermometer body.
Thermometers should not be used under the sun or in water.
Please do not use in the environment with strong electromagnetic
interference.
Place the thermometer in a position that the child can not touch.
It is suggested to practice many times to familiarize ourselves
with measurement methods and try not to change the factory settings
of products.
The result of measurement can not replace the doctor’s diagnosis.
There is no need for special maintenance during use. If there is a
malfunction, please contact the seller or manufacturer.
Please dispose of the waste and residue at the end of the service
life of the product according to local laws and regulations.
