Body Object Mode Digital Non Contact Infrared Thermometer
Product basic parameters
Brand Name:Care4U
Measuring distance:2cm-5m(recommend measurement distance)
Sound:Buzzer, 30 DB , Switch control
Temperature measurement range:Body:,89.6~107.6°F/32~42°C
Object:32~212°F/0~100°C
mode can be swift
Storage:Store temperature data up to 32 data sets
Battery:2*1.5V AAA Batteries
Low battery consumption:automatic shutdown without operation for 60
seconds
Packing
Unit Size:170*116*55mm
Net Weight:150g(without batteries)
Carton Size:605*360*295mm 50pcs/carton
Carton Weight:8.65kg
Features
HD LCD Screen
Non Contact Measuring
One Second Reading
Body and Surface Mode
32 Record Storage
℃/℉ Conversion
Fever Alarm
Voice On/Off
Precautions
1. Please read the instructions for use before the measurement, and
the forehead should be kept dry, and the hair should not cover the
forehead (please perform the measurement in an environment of
10℃-40℃) to ensure the accuracy of the measurement.
2. The forehead temperature measured quickly by this product is for
reference only and should not be used as a basis for medical
judgment. If any abnormal body temperature is found, please use a
medical thermometer for further measurement.
3. Please protect the sensing lens and clean it in time. If the
changing environment temperature changes too much, you need to
place the measuring instrument in the environment you want to
measure for 20 minutes, and wait for it to stabilize to adapt to
the environment temperature before using it to get a more accurate
value.
Operation Instrctions
1.Switch between body and object temperature mode
when in measurement mode,press the “SET”key to switch between the
object temperature measurement mode(the display shows a small
house) and the human body temperature measurement mode(the display
shows the child's smiling face)
- Look up the measured historical data
In the shutdown state,press the “MEMO” key to view the last first
measured data,and press it again to view the last second data.The
thermometer can store 32 sets of data measured in the human body
temperature measurement mode.Press the “POW”key to exit the look
up.
- Set parameters of the themometer
In the shutdown state,press and hold the “SET”key to 3 seconds
until the screen lights up.in F1 mode,press “MEMO” to select on or
off.Press “POW” to exit the setting.
- Set the temperature abnormal alarm threshold
In F1 mode,lightly press “SET” button to enter F2 mode,in this
state,press “MEMO” button to set the temperature.Press “POW” to
exit the setting.
- Set temperature compensation
In F2 mode,lightly press “SET” button to enter F3 mode,
press press “MEMO” button to set the temperature compensation.This
operation is more professional,it is recommended to keep the
factory default settings and set the value to zero.Press “POW” to
exit the setting.
- Switch between Celsius/Fahrenheit temperature units
In F3 mode,lightly press “SET” button to enter F4 mode,press
“MEMO” key to set the temperature unit(Celsius/Fahrenheit switching
selection).
FAQ
Q1:The device is on (the screen is measured),but the temperature
cannot be measured.
A1:Confirm whether the product enters the measurement data viewing
mode or parameter setting mode.If you under this mode,please press
the power button(POW key) to shut down(or wait 1 minute to
automatically shut down),and then press the temperature measurement
key after rebooting.
Q2:The temperature measurement is obviously too low
A2:Confirm whether the device is under the object temperature
measurement mode.If so,press the SET key once to enter the human
body temperature measurement mode.Enter the parameter setting mode
and check whether the temperature compensation setting is
negative.It is recommended to set the value to 0.
Q3:The measurement temperature is obviously too high
A3:Enter the parameter setting mode and check whether the
temperature compensation setting is positive.It is recommended to
set the value to 0.
