Explosion Proof Light Fixture CFT1 IP56 Marine Explosion-Proof Spot
Light
The scope of application:
Applied to the explosive gas place zone 1 zone 2 with the
temperature group T1-T4, also suitable for remote ilumination.
Products characteristic:
Good quality aluminium shell, brass net shield, toughened glass The
light body can rotate 350° horizontally and 45° up and down.
Production authentication
1. Passed the examination of National Explosion- proof Safety
Superisal and Inspection station for Luminaire.
2. Approval by CCS(China Classification Society), certificate
number 00515Q20619ROM.
Adopt standard
Conform to National standard GB3836, GB12045 EXPLOSION-PROOF
LIGHT>
Navigation Signal Lights | Ceiling Light |
| Spot Light | Other Cabin Lamp |
| Searchlight | Explosion-Proof Light & Explosion-Proof Connector |
| Pendant Light | Electrical Connector |
We are specializing in the development of a variety of marine electrical lighting
equipment, product development and sales. We are the excellent
supplier of marine supporting goods and an ideal cooperation
partner of design, shipbuilding, maritime transportation. At
present, our main product includes navigation lights series, marine
fluorescent lights series, incandescent lights series, floodlight
series, explosion-proof light series, electrical connectors series,
ship bells, ship bulbs, ship fittings, and other kinds of marine
lamps, marine light fixture accessories.
Navigation light:
When an aircraft or ship is sailing at night, it is a signal light
used to indicate its own position and direction of movement to
facilitate mutual avoidance and identification. General
regulations: The left wing tip of the aircraft is equipped with a
red light, the right wing tip is equipped with a green light, and
the tail end is equipped with white light; A red light is installed
on the port side of the ship, a green light is installed on the
starboard side, and white light is installed on the mast and stern;
a sidelight is installed on the non-motorized ships; only white
light is installed on the wooden sailboat
Inspection and maintenance requirements:
1. After the navigation lights are disassembled and maintained,
they should be reinstalled as they are. The responsible crew member
should pay attention to checking the installation position and
angle of the navigation light.
2. New navigation lights should hold a marine product certificate
issued by the classification society. The crew should pay attention
to check the technical parameters of the lamps: such as the type of
navigation light, the angle of light, the distance of visibility,
etc.
3. Regularly inspect and test navigation lights, including the
utility test of the main power source and emergency power source of
the navigation lights, and the alarm test of a power failure and
bulb failure.
4. Check the sidelight lightbox, repair the bad conditions found in
time
