Aluminum alloy assembly structure, no scrap concept, permanent use,
High efficiency, energy saving 70% efficiency;
2. The remaining sheet metal parts are sprayed with advanced
machinery
Paint or powder;
3. Rubber rollers are made of vulcanized rubber with stainless
steel shaft.
4. The cleaning part that comes in contact with water is made of
stainless steel.
5. Cleaning department, lift of the whole wind staff, maximum lift:
350mm, easy to clean and maintain.
6. Three pairs of brushes (Ø150mm) stainless steel shaft
construction (low-e glass, regular coated glass, and sunshine
coated glass can be cleaned without damaging the coated surface).
7. Two sets of special stainless steel aluminum alloy air knife
configuration, strong wind, excellent air drying effect, with
heating system (with temperature control, optional opening and
closing).
8. The fan is equipped with an air filter in the air inlet chamber,
which has a large amount of air and has a good air drying effect.
The entire fan box is installed at the top of the workshop and has
an air filter screen on the side for easy inspection. And cleaning;
9. Gear transmission, frequency control, main drive of digital
display, rotation of brush roller in cleaning section are driven by
independent belts of upper motor and lower motor respectively,
frequency conversion adjustment speed is stable, Achieves highly
demanded cleaning of special glass with a long service life;
10. Mechanical button control, washing machine digital display,
easy to operate, easy to operate, easy to maintain.
11. Clean the water tank of the outside washing machine, convenient
water tank, change water, check, clean the washing machine.
12. PLC control, optional with touch screen display. Convenient for
operator operation and maintenance, it can be connected to all
manufacturers of edge grinders without gaps. (Please purchase
separately if necessary)
