3D Elastic Filler For Water Treatment
The elastic three-dimensional filler is selected from polyolefins
and polyamides with high-quality varieties of corrosion resistance,
temperature resistance, and aging resistance. It is mixed with
additives such as hydrophilicity, adsorption, and thermal oxygen
resistance, and special wire drawing is used to make wool. Process,
the thread is interspersed and fixed on the corrosion-resistant,
high-strength central rope. Due to the excellent material selection
and process formula, moderate rigidity and flexibility, the thread
is arranged in a three-dimensional uniformly radiated state, and a
suspension type three-dimensional elastic filler monomer is made ,
The filler can be spread uniformly in all directions in the
effective area, so that air, water, and biofilm can be fully mixed
and exchanged. The biofilm can not only be uniformly implanted on
each thread, but also maintain good activity and The variability of
the gap, the ability to obtain an increasingly larger specific
surface area during operation, and the ability to carry out good
metabolism. This feature and phenomenon is unmatched by other
fillers in China.
Product Information:
Product Material:Polyolefin And Polyamide
Construction Process:Knotting And Binding
Product Structure:Combination Of Fiber West And Nylon Yarn
Product Grade:High Quality
Scope Of Application:Biochemical Treatment Of Industrial Organic
Wastewater And Urban Sewage
Features:
Compared with hard honeycomb fillers, three-dimensional elastic
fillers have greater pore variability and no blockage; compared
with soft fillers, the material has a longer life and does not
stick to the group; compared with semi-soft fillers, the specific
surface area is larger and the film hangs Fast and low cost.
Therefore, the filler can be confirmed to be the fourth-generation
high-efficiency and energy-saving novel filler following various
hard fillers, soft fillers and semi-soft fillers.
Main Technical parameter table (Reference):
Model (mm) | Length (m/m3) | Weight (kg/m3) | Filmed weight (kg/m3) | Surface area (m2/m3) | Diameter wire(mm) |
| Æ150 | 44 | 1.4～2.0 | 64～69 | 200～310 | 0.35～0.45 |
| Æ160 | 39 | 1.3～1.9 | 61～66 | 280 | 0.35～0.45 |
| Æ180 | 30 | 1.2～1.8 | 57～62 | 265 | 0.35～0.45 |
| Æ200 | 25 | 1.1～1.7 | 55～60 | 250 | 0.35～0.45 |
