NN 3.5mm RN 4.8mm WN 6.5mm SynOcta Implant Analog
ITI Straumann Tissue Level & SynOcta® Analog Compatible with
NN 3.5mm/ RN 4.8mm/ WN 6.5mm
Material:
Stainless Steel 303F / Titanium GR5
Feature:
* Reproducibility
* Precision machined up to ± 5µm
* Position indicator & Level stopper for 3D print & Stone model
* Anti-rotate design
Head that reproduces the implant system joint.
Position indicator and level stopper support precise positioning of
removable gingiva mask.
Gentle retaining area to easily position the soft gum in the
working model.
Effective circuit and self-locking cross retainers that, inside the
plaster, provide extraordinary embedding even in cases of abutment
drilling on model.
Its discrete size means that analogues can be easily fitted,
despite the implants being close together or not parallel.
Approved by CE, ISO 9001, ISO 13485
| ANALOGUE | A | B |
| ON IMPLANT |
| 14.009 | RP(RN) | 4,80 | Oct. 3,10 |
| 14.045 | WP(WN) | 7,50 | Oct. 4,00 |
| ON ABUTMENT |
| 14.010 | RP(RN) | 4,80 | Oct. 3,00 |
| 14.046 | WP(WN) | 6,50 | Oct. 4,00 |
Points of ITI Straumann Tissue level Analog:
Fig. 1
Fixture level implant analogs are available for all three platform
diameters (NN 3.5, RN 4.8, WN 6.5mm) and can be identified through
apparent size differences, connection type (external, internal) and
4.8mm platform analogs are marked with a red color band (Fig.1
middle). NN analogs (Fig.1 left)are machined with a external
octagon corresponding to the actual implant. RN and WN analogs have
a internal octagon of different size and are not interchangeable
from the 4.8mm platform to the 6.5mm platform (Fig.1 right) and
vice versa.
Fig. 2
Abutment level analogs are offered only for RN and WN implants and
represent a installed solid abutment and the platform of the
implant. Three color coded abutment level analogs are produced for
RN platform (Fig.2 top row) implants correlating to the three
possible height solid abutments. Yellow embodies a 4mm height
abutment, gray equates to a 5.5mm height abutment and blue conforms
to a 7mm abutment. WN solid abutment analogs are provided in two
color coded iterations (Fig.2 bottom row) concurrent with the two
WN solid abutment heights offered. Green correlates to a 4mm
abutment height and brown coheres to a 5.5mm solid abutment height.
