Yellow NP 3.0 Astra Tech OsseoSpeed Titanium Implant Abutment
Astra Tech OsseoSpeed® Titanium Ti-Base Abutment Compatible
Yellow(NP 3.0) / Aqua (RP 3.5-4.0)/ Lilac (WP 4.5-5.0)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Exterior retentions for more cementation bonding
Specific design ensures a stable union, reinforcing the structure
of zirconium in the areas of greatest stress, softening edges and
ensuring the service life of the prosthesis.
Furthermore, the saving is also shown in the less time needed when
working on the most sensitive part of the prosthesis, the
adjustment with the implant.
Approved by CE, ISO 9001, ISO 13485
| Ti BASE ON IMPLANT | A | B | D |
| 15.024 | RP | Non-engaging | 3,00 | | 4,50 |
| 16.024 | RP | Engaging | 3,00 | Hex 2,10 | 4,50 |
| 15.025 | WP | Non-engaging | 4,00 | | 4,50 |
| 16.025 | WP | Engaging | 4,00 | Hex 2,50 | 4,50 |
| Ti BASE ON UNIABUTMENT® | A | B | C | D |
| 15.036 | 20º | Non-engaging | 3,50 | Cone 20º | 0,45 | 4,50 |
| 15.037 | 45º | Non-engaging | 3,50 | Cone 20º | 0,45 | 4,50
|
Points of Astra OsseoSpeed™ Abutment:
Collar height
Direct Abutment API™ titanium abutments are conceptually designed for posterior
restorations and intended to be installed by the surgeon. These
abutments are machined as a one piece unit (abutment body and
screw) without a index (hex) at the implant/abutment connection
interface. Intended for abutment level impressions with appropriate
plastic impression copings.
3.5/4.0 platform group direct abutments are available with a 4mm
emergence profile and a choice of four (0.5, 1, 2.5, 4mm) collar
heights or a emergence profile of 5mm and three (1, 2.5, 4mm)
possible collar heights. 4.5/5.0 platform group direct abutments
are available with a 5mm emergence profile and a choice of four
(0.5, 1, 2.5, 4mm) collar heights or a emergence profile of 6mm and
three (1, 2.5, 4mm) possible collar heights.
Emergence profile
All abutments are marked with a black line 1mm from the top of the
abutment in case the abutment needs intraoral height adjustment.
Analogs are marked in the same manner and can then be reduced to
the same height, using the marker as a reference point. A number
printed on the abutment indicates the emergence profile (4, 5 or
6mm). These abutments are usually sold as a kit containing the
abutment, abutment carrier, impression coping, analog and burnout
copings but also available a la carte. Abutments are torqued to
25Ncm regardless of platform connection diameter group.
