Dentsply Xive® UCLA CoCr Base Castable Abutment Compatibe
3.0mm/ NP 3.4mm/ RP 3.8mm/ WP 4.5mm/ 5.5mm (Engaging &
Non-Engaging)
Material:
CoCr base and castable plastic chimney
Made of CoCr base and castable plastic chimney material for the
stable retention of modelling materials
This base is available in two types of platforms: engaging and
non-engaging.
Approved by CE, ISO 9001, ISO 13485
| CrCo BASE | A | B | C | D |
| 30.038 | NP | Non-engaging | 3,40 | Circular | 1,30 | 4,50 |
| 31.038 | NP | Engaging | 3,40 | Hex. 2,20 | 1,30 | 4,50 |
| 30.039 | RP | Non-engaging | 3,80 | Circular | 1,30 | 4,90 |
| 31.039 | RP | Engaging | 3,80 | Hex. 2,50 | 1,30 | 4,90 |
| 30.040 | WP | Non-engaging | 4,50 | Circular | 1,30 | 4,50 |
| 31.040 | WP | Engaging | 4,50 | Hex. 2,25 | 1,30 | 4,50 |
Points of Dentsply Xive UCLA Crco base Abutment:
Xive® S
UCLA's (AuroBase, cast on abutment) are only offered as an indexed
component. Screws (1.22mm hex) are included as a kit with each
abutment for this implant system. All screws are interchangeable
from implant diameter to implant diameter with the exception of
3.0mm (brown) abutments, which have their own specific screws.
Xive® TG
UCLA's (AuroBase, cast on) abutments are only offered as an indexed
component. No zirconia abutments are available for this system. All
screws (1.22mm hex and slot combination) are interchangeable from
implant diameter to implant diameter and need to be purchased
separately.
