Engaging Titanium Dentsply Xive Dental Implant Temporary
Dentsply Xive® Titanium Temporary Abutment Compatible
3.0mm/ NP 3.4mm/ RP 3.8mm/ WP 4.5mm/ 5.5mm (Engaging &
Non-Engaging)
Material:
Ti 6AI-4V ELI (Supply from Germany)
Feature:
* Titanium interface abutment
* 1pc Screw Included
* Precision machined up to ± 5µm
* Combination of high fatigue strength
* Superior level of biocompatibility
* Exterior retentions for more cementation bonding
Specific design ensures a stable union, reinforcing the structure
of zirconium in the areas of greatest stress, softening edges and
ensuring the service life of the prosthesis.
Furthermore, the saving is also shown in the less time needed when
working on the most sensitive part of the prosthesis, the
adjustment with the implant.
Approved by CE, ISO 9001, ISO 13485
| Temporary Abutment | A | B | C | D |
| 24.038 | NP | 3,40 | Circular | 1,50 | 4,50 |
| 25.038 | NP | 3,40 | Hex.2,20 | 1,50 | 4,50 |
| 24.039 | RP | 3,80 | Circular | 1,50 | 4,50 |
| 25.039 | RP | 3,80 | Hex.2,20 | 1,50 | 4,50 |
| 24.040 | WP | 4,50 | Circular | 1,50 | 4,50 |
| 25.040 | WP | 4,50 | Hex.2,20 | 1,50 | 4,50 |
Product Description
Dentsply XIVE® Titanium Temporary Abutment is designed for the
fabrication of temporary screw-retained restorations. Provisional
restorations can be made chairside using any standard fabrication
technique (e.g., vacuum-formed sheet, prefabricated crown/bridge
form, etc.). Bite verification cylinders are precisely machined
from titanium alloy and attached to the implant fixture (or implant
analog) by a titanium screw or provisional guide pin. Each bite
verification cylinder is specific to the restorative platform of
the seated implant.
Engaging bite verification cylinders are indicated for single-unit
restorations to prevent rotation of the provisional crown.
Non-engaging bite verification cylinders are indicated for
multi-unit bridges, and therefore avoid the unnecessary
anti-rotational implant connection feature to allow for a passive
path of insertion.
Accessories
Each Dentsply XIVE® Titanium Temporary Abutment is packaged with a separate provisional
screw (Inclusive Guide Pin) and separate retaining screw (Inclusive
Titanium Screw) compatible with the restorative instrumentation of
the specified implant system. The guide pin should be used
throughout the fabrication process. The titanium screw should only
be utilized to retain the finished provisional.
Sterility
Dentsply XIVE® Titanium Temporary Abutment are packaged NON-STERILE. Prior to use in the oral environment,
they should be cleaned, disinfected, and sterilized firstly.
