Full automatic surgical face mask making manufacturing machine
Function introduction of one to two production line :
This production line is an automatic one-to-two mask machine,
and one body machine drives two outer ear belt machines.
After the main body machine outputs the mask body,
the mask body sheet is conveyed to the line conveyor by a conveyor
belt structure.
The mask plate is conveyed to the conveyor belt by a line conveyor,
and the mask sheet is conveyed above the first mask plate on the
front of the
earband machine through the conveyor belt.
Finally, the mask plate is placed on the earpiece machine's mask by
the cylinder
pressing Inside the pan, the earband machine then completes the
welding of the
earbands, edging, etc. to complete the production of an earband
mask product.
This machine adopts PLC and touch screen control. The main conveyor
belt is
transported by a single-phase motor. The stepping motor is
reversed.
The transmission is accurate, the control is stable, and the speed
is adjustable.
Features
1. High stability, low failure rate, beautiful appearance without
rust;
2. Computer PLC programming control, servo drive, high degree of
automation;
3. Photoelectric detection of raw materials to avoid mistakes and
reduce waste
Technical Parameters:
(1) Equipment size: 6150mm (L) X 3720mm (WO X 1950mm (H) (excluding
receiving line);
(2) Appearance color: international standard warm gray 1C (DB
standard color), according to this standard
without special instructions;
(3) Equipment weight: ≤5000kg, ground load ≤500KG / m2;
(4) Power supply: 220VAC 5% of equipment, 50HZ, rated power of
about 9KW ;
(5) Compressed air: 0.5 ~ 0.7 MPa, using flow rate of about 300L /
min;
(6) Operating environment: temperature 10 ~ 35'C, humidity 5 ~ 35%
HR, no flammable, corrosive gas,
no dust (cleanness no less than 100,000).
(7) Production efficiency: 90-130PCS / MIN;
Specifications:
| Model | HTL |
| Production capacity | 100-120pieces/min |
| Power | 8.5 kW |
| Dimension (L*W*H) | 4300mm*4200mm*1850mm |
Samples:
Our Services
Pre-sale
1.confirm machine type: Negotiate with clients to seclect the correct machine according to
customers’ requirment.
2.Quote and Sign firm contract: After confirm with customers with all details, such as payment
terms, model, delivery time, send official quotation to clients.
After-sale
1.When equipments arrive in clients factory,send engineers there
for installation and ensure customers know how to operate the
machine.
2.In order to improve our products,we keep in close contact with
customers to know their feedbacks and suggestions.
3.From the date of the buyer receive the machines, free warrant for
12 months
Packaging & Shipping
1. Product production is completed, by the quality inspection
department to check.
2.After inspection qualified, clean for whole machine.
3.Packing:
a. Inside the machine put desiccant.
b. Add 6 cm thick foam plate around the machine, Then, winding
stretch film for reinforcement, and combined with bubble wrap.
c. On wood packaging on the outside of the machine, then use metal
reinforcement with steel.
4.Container:according to different products for reinforcement.
