Movable and Portable Vehicle Crash Barrier Stop moving vehicle
The main material of this product is hollow aluminum profile, Among
them, the bottom contains 3 pieces of rubber with a thickness of 10
mm, and there is an iron plate with a thickness of 2.3 mm inside
this rubber plate, whose function is to increase the friction
between rubber and the ground. Its weight is very light, even a
worker can easily move it. And there are two rubber wheels with a
diameter of 10 cm are installed at the bottom, which make the
device more convenient to move.
►►A person can move it alone, which is very convenient.
Compared with the road crash barriers on the market, some need to
be piled and fixed on the ground(such installation work is very
time-consuming and labor-consuming, and will cause damage to urban
roads); Some are made of iron (very heavy and easy to rust,
resulting in an unsightly appearance, which is not conducive to
urban beautification construction); Others are plastic (not only
rough workmanship, but also pollute the environment. Moreover, the
plastic material is not durable, high-cost and consumption).
Traditional construction sections set mode, only equipped with
safety cones, safety signages, lack of crash barriers. In this
case, if the driver straies into a restricted zone, because the safety cones and safety signage do not have the
function of intercepting the car, it may cause casualties.
Traditional way of road setting :
.
Lack of buffer stop equipment is very dangerous for construction
personnel.
The plastic anti-collision bucket material is fragile and has
little resistance, which cannot effectively stop the vehicle from
moving forward.
Our portable vehicle crash barrier is made of recyclable aluminum.
If serious damage is caused by impact, this material can also be
sold or recycled, which greatly reduces purchase costs. Its weight
is only 25 kg/unit, and wheels are installed at the bottom, it can
be easily moved by one person.
Our products have been widely used and recognized in Japan.The
example in the picture is used for road maintenance in Nagoya city,
Japan.It is usually used in two sets, and you can set according to
the road conditions.
This product does not need to be piled on the ground, as long as
placed in the construction or other required places as needed.It can be moved whenever and wherever possible without wasting
working hours, which is very time-saving and labor-saving, greatly
reducing the staff’s workload.
Another advantage: it can be folded, the height after folding is
400mm, the width is 860mm, and the length is 1077mm, which saves
storage space.
►►It is can be folded and packed. The height of a 40-inch container
can hold 26 tins, each holding 8 mobile guardrail.
