1/2'' 220V Air Compressor Automatic Drain Valve With Timer Controlled

1/2'' 220V Air Compressor Automatic Drain Valve With Timer Controlled

This is a brand new 220 volt electronic, automatic timed, moisture drain for air compressors, and air tanks. This drain can be set to drain every minute or up to every 45 minutes. The valve can be set to stay open between .5 and 10 seconds. Most commonly, these drains are set to drain for 3 seconds every 30-45 minutes. This valve also has a "Test" button that you can use to manually drain it at any time. The 1/2" female NPT outlet can be sealed simply by using tape. these are good quality, industrial drains that have a strainer built into them to protect the valve from debris, this strainer can easily be cleaned if it becomes clogged.

Main Dimension of Air Compressor Automatic Drain Valve:

Application Examples from customer feed back:

Auto Drains Installation & Setup:

1. Installation of the auto drain is fairly simple.

2. The existing manual drain is screwed out, and the auto drain is screwed into the same port.

3. Or, if the outlet on the manual drain is threaded, add a nipple and screw the auto drain onto the nipple. If you opt for this route, ensure that you leave the manual tank drain fully open.

4. Setting the time is straightforward as well. Typically there will be a timer knob, usually calibrated for hours and/or days on which you set the frequency of operation of the auto drain. Once a day? Perhaps twice a shift if the air compressor runs daily and frequently.

5. There will be another dial or knob to set the duration of the drain cycle. This dial is normally calibrated in seconds and/or minutes. This adjusts the length of time that the drain is open to void water and from the tank.

Air Compressor Automatic Drain Valve Spare Parts:

Solenoid Valve Timer Solenoid Valve Coil Solenoid Valve Armature

Brando Solenoid Valve Factory Production Video:

More Air Compressor Solenoid Valve for you to choose:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on