2500*3500MM DOUBLE GLASS PRODUCTION LINE
A, washing and drying part
The front and back squeeze wheel are all actively moved and
conveyor. No mater the glass size is big or small , it all
guarantee the glass pass through smoothly.(Same like LISEC)
- three pairs soft brushes can wash low-e glass, the diameter is less
than 0.1mm.
- Air knife is float design , it always keep the right and suitable
distance 3mm between the glass surface and air knife (Same like
LISEC structure ) check the following picture. (3mm is the best
drying distance)
B, Pressing part
1, There have stress after welding in the Pressing frame ,
so the out-of -shape problems is inescapable after using some time
(machine can not press DGU properly evenly and tightly )
that is not good for IGU quality, any glass project can not accept
these products
For this uneven inescapable issue, here are our solution :
- we all do the aging treatment , it’s the stress-remove by vibration
failure device.
The important is We design the 74 points on the backbord, if there
have any out-of shape problems we can adjust easily at any time. (
same like Bystronic structure )
C, Gas filling
1, Input the argon gas concentration into touch screen according to
customer required
2, Display Function : touch screen will display whole argon gas
filling processing , you will know very clear how much already
argon gas filed inside
We are the first and the only one company who can show the argon
percentage on the touch screen on line,its very useful for
customer,When it reach the data customer set ,It will alarm and
stop automatically
3, GAS filling from bottom and it was designed separately for
saving gas .
A: The pressing part was devided into 4 part , (per 800mm), when
the small size glass(less than 800mm) pass through the pressing and
gas filling section, ,only one part work.if more than 800mm but
less than 1600mm,it will two parts work, no need the whole press
and gas filling section work. it can save the argon gas.
B: On the vertical side of the side-baffle there sensors can
recognize how much the percentage there.When the argon gas the
percentage is reach the value that we set in . the gas filling
resource will stop. So it can save a lot of argon gas. When argon
gas fill every piece of double glass there will have three sides
close,(the bottom ,two side,only the top open,and on the vertical
side there have sensor, when the argon gas reach the somewhere and
sensor recognize it reached the value that we set up ,it will stop
automatically),it is a very good design.
5, Sparklike detection device, a professional and Authoritative
device
6, 2 piece IGU Automatic argon gas filled in one time , high
filling speed , it improved 50% working efficiency, Saving argon
gas. (standard size no more than 1.5m)
7, normal gas filling line 27s/m2 34s/m2
| Max.glass size | Normal glass | 2500*3500mm
|
| Glass with argon gas | 2500*3200mm |
| Min.glass size | 280*450mm |
| Glass thickness | 3-15mm |
| Insulating glass thickness | 50mm |
| Glass washing speed | 2-10m/min |
| Glass conveyor speed: | 45m/min |
| Washing brushes | 3 pairs |
| Water supply: | Water consumption:0.5t/h conductivity:≤50μs/cm |
| Air supply | Flow: 0.8m/min |
| Air pressure | ≥0.8MPa |
| Total power | 3P380V 50HZ 34KW |
| Dimension | 23500*3500*3700mm |
Main Products
Vertical Insulated Glass Produce Line for double glass production
line
Auto Sealing Robot for double glass production line
Sealant Spreading Machine for double glass production line
Low-E Glass Washing &Drying Machine for double glass production
line
Smart Edge Deleting Machine for double glass production line
Automatic Spacer Bending Machine for double glass production line
Automatic Desiccant Filling Machine for double glass production
line
Butyl Extruder Machine for double glass production line
Glass Edge grinding Machine for double glass production line
Spacer Cutting Machine for double glass production line
Sealing gun Freezer for double glass production
Rotated Sealant Spreading Table double glass sealing
Argon Gas Filling Machine double glass
Exhibition show
National Glass Expo :Glasstec in Germany , CAM Eurasia Glass in
Istanbul, India Zak, India Glasspro, Glasstech Aisa , Glass build
in America, Mexico glass expo .Big Five In Dubai, Egpyt.
Domestic glass expo : China glass , (Beijing /shanghai), Guangzhou.
Contact way
JINAN LIJIANG AUTOMATION EQUIPMENT CO.,LTD
Name: Rose
Mob/Whatsapp/wechate:+86 130 7535 5217
QQ:904878044
Skype:904878044@qq.com
Web:www.lijiang-glass.com
EMAIL: Sales@lijiang-glass.com
