Pneumatic And Hydraulic Silicone Sealants Filling Machine For
Insulating Glass
Main feature of the LJST02A silicone sealants spreading machine
• Imported motor system to improve equipment efficiency
• Sealant gun, stainless steel mixer
• High pressure protect device
• Anti-back flow control structure
• Mixed rate detector can control the rate of two kinds of glue
The silicone sealant-spreading machine LJST02A uses motor to control the sealing.
| Working air pressure | 0.3-0.6MPa |
| Sealant spreading pressure | 15-20MPa |
| Sealant volume | 4L/min |
| Diameter of A/B sealant | 570mm/280mm |
| Sealant spreading air pressure ratio | 50:1 |
| Mixed rate | 6:1-14:1 |
| Air supply | Flow 0.8m3/min |
| Air pressure | ≥0.8MPa |
| Overall dimension | 1100*950*1630mm |
Main feature of the sealant-spreading machine LJST03
• Use cylinder to provide power
• China sealant gun, stainless steel mixer
• High pressure protect device
• Anti-back flow control structure
• Mixed rate detector can control the rate of two kinds of glue
| Working air pressure | 0.3-0.6MPa |
| Sealant spreading pressure | 15-20MPa |
| Sealant volume | 4L/min |
| Diameter of A/B sealant | 570mm/280mm |
| Sealant spreading air pressure ratio | 50:1 |
| Mixed rate | 6:1-14:1 |
| Air supply | Flow 0.8m3/min |
| Air pressure | ≥0.8MPa |
| Overall dimension | 1100*950*1630mmI |
Insulating glass sealants types:
Silicone sealants is an ointment like material that solidifies into a tough rubber
like solid once exposed to moisture in the air. It can be divided
into deacetylation, dealcoholization, deamination and
depropylation. Silicone adhesive is often used for glass bonding
and sealing, so it is commonly known as glass adhesive. One
component silicone glass adhesive is a kind of paste like material,
which solidifies into a tough rubber like solid once exposed to
moisture in the air.
Silicone structural sealants :
It is mainly used for structural or non structural bonding assembly
between metal and glass of glass curtain wall.
2. It can connect glass directly with the surface of metal
components to form a single assembly component, which can meet the
design requirements of curtain wall with full or semi hidden frame.
3. Structural bonding and sealing of insulating glass.
Identification method:
There are many kinds of sealants: silicone sealant, polyurethane
sealant, polysulfide sealant, acrylic sealant, anaerobic sealant,
epoxy sealant, butyl sealant, chloroprene sealant, PVC sealant, and
asphalt sealant. Identification of silicone adhesive mainly depends
on the following properties: first, breaking strength (breaking
force / cross-sectional area); two, bonding strength (pulling force
/ bonding area, except substrate damage); three, elongation at
break (length / length of breaking); four, anti-aging ability;
five, appearance (sub luminosity, particle, bubble); 6, Shape
retention (no drawing, vertical surface not sagging); 7. Shelf
life; 8. Curing time.
There is no good or bad, performance corresponding to the price,
suitable for the best. Secondly, there is stability and sufficient
quantity, which is the test of manufacturers. If the capacity of
sealant is less than the marked capacity (Note: it is the capacity.
This situation of sealant is very serious), this kind of sealant is
eliminated first, there is a problem in the business ideas of such
enterprises, and the products are not much better. (there are many
problems, which proves that the control of production process is
not strict). If the amount is large, the production stability of
sealant should be considered.
