►The water tank system and water heating fuction
►Using Europe's advanced anti-noise system to create a good working
environment for employees.The noise can be controlled below 90 decibels by using nylon gear
and sponges.
Brief introduction of automatic glass cutting table
• Its working principle is to convey the cut glass by conveying
belt to worktable, automatically input the position of glass
through photoelectric scanning system, and then the cutting head
with diamond wheel on the cutter holder moves along X and Y
directions respectively by program control,cutc the sheet. CNC
motion controller is used in the control part of the machine, and
advanced AC servo motor is used in the drive part.
• Automatic Cutting table: It consists of chassis mechanism, beam
mechanism, worktable mechanism, cutting knife mechanism, conveying
mechanism, photoelectric scanning positioning mechanism and
electrical control system.
• Detailed working steps:
• Refer to "Instructions for the Use of Fully Automatic Glass
Cutting table"
• Equipment performance:
• 1,The chassis material is welded and formed by the national
standard manganese-containing section bridge steel (Q345A) after
aging treatment. The comprehensive mechanical properties,
plasticity and welding properties of this kind of steel are good.
The frame is processed as a whole, and the stability and accuracy
of the equipment are greatly improved by tempering aging treatment
to ensure the stability of the product. After special rust removal
process, the surface rust spots and oxide layer are removed. The
top coat is sprayed with high-grade epoxy primer and the top coat
is sprayed with high-grade automobile paint.
• 2,Through the analysis of professional structure software, the
equipment ensures the stability, dynamic balance, mechanical
strength to achieve the most perfect match, and ensures that the
structure of the table is not deformed.
• 3,The device has one key reset function. It can complete all the
preparations before starting automatically by clicking on the touch
screen, which greatly improves the work efficiency.
• 4,Reasonable arrangement of integral cables and gas pipes and
complete sealing
• 5,High-speed silent linear guide is adopted for guide rail, which
has high cutting accuracy and low noise.
• 6,Advanced Japanese Ankawa servo motor is used in the driving
part, which makes the equipment reliable, error small and
efficient.
• 7,Japanese SMC proportional solenoid valve is used for cutting
rice. The pressure is automatically adjusted according to the glass
thickness. The cutter head rotates 360 degrees, and the upper and
lower buffering cutter cuts (any straight line and all kinds of
special shaped glass can be cut accurately).
• 8,The knife head is equipped with knife protection function. If
the knife head falls outside the glass or the glass gap, the
program stops automatically, effectively preventing damage to parts
and glass.
• 9,Double motor high speed drive (large inertia Yaskawa servo)
ensures cutting speed and fluency
• 10,Conveyor device, synchronous automatic transmission device,
convenient for glass upper and lower transmission, frequency
conversion speed regulation, stable and easy to optimize the
transmission speed
• 11,Positioning device, photoelectric scanning positioning system
• 12,Compensation function, tool eccentricity compensation,
clearance compensation, pitch compensation
|
• ,Max size:6100×3300mm • ,Thickness:3～19mm • ,Cutting accuracy:±0.30 • ,Cutting accuracy of special-shaped glass:±0.35 • ,Cutting speed:0-200m/min • ,Conveying speed:0-25m/min • ,Machine size:6800×4100×1500mm • ,Working table height:900mm±20mm • ,Weight:2600kg • ,Total power of equipment:9-15kw |
