Main features of Insulating Glass Sealing Robot

1. The silicone sealant spreader is equipped with Yaskawa servo motor, servo control system and touch screen. The operation is more convenient and intuitive, real-time display of technical parameters, simple and intuitive, stable and efficient.

2. The silicone sealant extruder can be connected or used independently.

3. The gearbox is divided into four parts. The glass can be stored in advance, which can effectively reduce the waiting time of the glass and effectively improve the efficiency

4. Automatically identify glass size, automatically detect glue depth and automatically adjust glue coating speed

5. Automatic memory function.

6. The corners of the glass are full, without bubbles, and the glue output is precisely controlled.

7. Synchronous belt drive to ensure smooth glass transportation and accurate positioning

8. It can seal three-layer, double-layer hollow glass, special-shaped and f4 side stepped glass

9. The parts processing center is highly standardized and interchangeable, which improves the convenience of maintenance and ensures the long-term stable use of the equipment;

10. The conveyor wheel with back plate adopts mosaic design to make the glass run more smoothly;

11. The glass support module on the conveyor belt adopts a replaceable V-shaped block, which is easy to replace after wear and has low cost;

12. It supports the bonding of two different sealants and is easy to operate.

13. The glue mixing system adopts anti-adhesion structure, which is easy to clean.

Details of sealant dispending machine

• 4 sections, can storage glass

• Japan Yaskawa servo system control,full automatic and high-efficiency sealing machine

•Automatically repair glass corners with scraper and roller

• Adopt timing belt, smooth transfer and accurate position

• Can coat double glass

• Shape glass with optional edges, step glass, triple glass (Optional)

• Automatically measure glass size, glue depth (30mm)

• Every auto-function is with manual operation

• One set of booster pump controls two groups of sealants (Optional)

• Can use silicone, polysulfide and silicone structural sealants

• Glue head is in the front of the machine, which is easy for coating step glass

• With code scanning function (Optional)

• Can be connected with insulating glass processing line

One Set of Pump A & Pump B

Equipped with single A component and single B component. Glue A and B automatic mixing, automatic ratio.

Two Sets of Pump A & Pump B

Equipped with two sets of A components and two sets of B components, which can be used for two kinds of different sealants, such as silicone rubber, polysulfide rubber, silicone structural adhesive and so on

Dyad Body Device

The dyad body device has two functions. The left one is used for filtering impurities and moisture when filling gas into , then the right one plays the role of lubrication.

The Device of Sealing Part

Adopt Japan YASKAWA servo motor to control the sealing part with 360°rotating. Setting scraper blade to scrape out extra glue and no need to repair glass corners by second time.

Intelligent Sensor

Automatically position the glass and sensor glue deep, the coating speed can be adjustable online.

Eight Servos

The robot uses eight YASKAWA servos, four of them control transmission parts, in the another four servos, they control sucker, lifting, driving and revering mechanism and rotating.

• Main components list

Tech Specification

Related production

Rotated Sealant Spreading Table LJSK02

Main feature

• Easy operating, simple and flexible

• It is used for fixing and rotating glass when manual coating the outside of IG glass

• The middle sucker is suitable for small pieces of glass,however,extra support frame is for large pieces of glass

Technical data