Glass washing machine technical parameters CP-2500A
Cleaning machine for cleaning and drying the upper and lower
surface of LOW-E glass
USES:
glass washing machine CP-2500A used for cleaning and drying the
upper and
lower surfaces of ordinary plate glass and high quality low-e
glass,it is composed
of incoming segment, cleaning air-drying segment and outgoing
segment.
Structural characteristics:
- Aluminum alloy assembled structure, no scrap concept, permanent
use,
high efficiency, energy saving 70% efficiency；
2. The rest of the sheet metal parts are sprayed with advanced
mechanical
paint or powder；
3. The rubber roller is made of vulcanized rubber with stainless
steel shaft；
4. The washing part in contact with water is made of stainless
steel；
5. Cleaning department, wind staff overall lift, the maximum lift:
350mm,easy to
clean and maintain；
6. Three pairs of brush(Ø150mm)Stainless steel shaft configuration
(low-e glass,
ordinary coated glass and sunshine coated glass can be washed
without damaging
the coated surface)；
7. Two pairs of special stainless steel aluminum alloy air knife
configuration, strong
wind, good air drying effect, with heating system(with temperature
control device,
optional opening and closing)；
8. The fan is equipped with air filter in the air inlet chamber,
with large air volume and
good air drying effect,The whole fan box is installed in the upper
part of the workshop,
with the air filter screen on the side for easy inspection and
cleaning；
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards)
and deionized water water supplement (deionized water equipment
shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
| Weight | 3940kg |
Jinan Lijiang Automation Equipment Co., Ltd. is located in the
beautiful spring
city------Jinan. It is an enterprise which integrated glass
processing equipment research and development,
sales and service into a whole. As it is close to Beijing-Shanghai
high-speed rail, the transportation is very
convenient.
The company is committed to building high-end insulating glass
machinery and equipment by learning from
famous experts, establishing the research and development centers,
cooperating with domestic and foreign
well-known enterprises, importing advanced technology and so on.
Now, our friendly partners include North
Glass, Xin Fuxing, Yaohua, Dalian Huaying, Beijing Guanhua,
Shanghai Hao Jing, Sichuan Li Hehua and
other well-known enterprises. Since the establishment of the
company, our products have been exported to
Europe, America, South America, the Middle East, Southeast Asia,
India, nearly 30 countries and regions.
At the same time, our company worked with the well-known domestic
research institutes, such as the North
China Industrial Group, Shandong University and others, to
constantly improve the level of technical research.
So far, we have independently produced the vertical automatic IG
production line with filling gas on line, the
vertical IG sealing robot, the automatic spacer bending machine,
the automatic desiccant filling machine and
the new fully automatic butyl extruder machine, its technology and
quality have reached the highest leading
level in China.
With the rapid development of insulating glass industry, LIJIANG is
looking forward to working with you for
win-win situation and jointly creating a new world.
