New Technolgy Butyl Aluminum Spacer Of Insulating Glass For Any Shape

Butyl Aluminum Spacer for Insulating Glass

Butyl Aluminum Spacer for Insulating Glass is a new product ,it Summarize the advantages and disadvantages of traditional products to optimize and improved products according to market demands.the surface is made of 3003 alloy aluminum strip, Internal use of polymer PVC material,3A molecular sieves, butyl silicone sealant.

Service support

1.24 hours technical supporting by emails.

2. 24 hours calling service & online service.

3. Oversea door–to–door service available.

4. User manual and detailed operating video1CD available.

Quality assurance Storage period:

Vacuum sealed for 3 years, made into insulating glass according to the operation manual, warranty for 10 years

​

Packaging

Vacuum, Roll then packed in Carton 12cartons1pallet(big) 20cartons1pallet(small) 144 big cartons in 20'container. 176 small cartons in 20'container.

Advantage:

Better sealing:Using german imported butyl rubber ,the sealing will be good.

Better water vapor barrier: Extra long water vapor barrier, it prevent the water vapor to coming in.

Better production efficiency , can process various shapes of anisotropic insulating glass.

Good air tightness : Polymer binder prevent water vapor to permeating. Good anti–high temperature perfermance.

Good resistance to low temperature. Good anti–aging performance.

Use Manufacturing building doors and windows,Train,Bus,insulating glass ,insulating door, shutter,Refrigeration equipment and so on. Using method and attention All the glass should be dry and clean. The insulating glass should be made by the following steps.

1. Putting the spacer onto the corner of one glass, then making the spacer straight, at the same time keeping the spacer around the surface of the glass, at the end, reserved 2.5mm– 3.0mm to the edge of the glass and the spacer should be reserved about 20mm more joint the pact pressing the joint, making no space in the circle.
2. Then putting another glass onto the one which has the spacer above, making sure the two pieces of glass are mutual alignment in both vertical and horizonal.
3. Putting them into the hot press machine with the temperature between 110–140Š inside and 50~60Šthe outlet.
4. According to the structure requirement of the insulating glass, two component silicone sealant could be putting outside of the spacer. Then a piece of insulating glass should come out.
5. The butyl spacer must be carried out in accordance with this attention otherwise may cause the seal leakage.

Keywords: warm edge spacer.flexible spacer bar.rubber spacer with aluminum