Cement Kiln: Cement Rotary Kiln Wet and Dry Cement Rotary Kiln
CITIC IC developed large new dry process cement rotary kiln product
with cement research and design institutes in Tianjin, Nanjing and
Hefei by using domestic advanced technology, and the product can
match 3000~10000t/d large new dry process cement production line.
The company has a first-rate rotary kiln development, research and
design team, perfect test and inspection means and excellent large
rotary kiln manufacturing equipment and manufacturing technology,
and has formed a complete technology and production system
integrating rotary kiln design, manufacture, install and debugging
service.
6×95 m 10000tpd Cement rotary kiln
5.6×87m 8000tpd Cement rotary kiln
7000 tpd Cement rotary kiln -cement plant for India Binani
Cement Rotary Kiln Specification Wet and Dry Cement Rotary Kiln
| Product specifications(m) | Kiln dimensions | Capacity(t/d) | Rotation speed(r/min) | Motor power(kw) | Total weight(t) |
| Diameter(m) | Length(m) | Obliquity(%) |
| Φ2.5×40 | 2.5 | 40 | 3.5 | 180 | 0.44-2.44 | 55 | 149.61 |
| Φ2.5×50 | 2.5 | 50 | 3 | 200 | 0.62-1.86 | 55 | 187.37 |
| Φ2.5×54 | 2.5 | 54 | 3.5 | 204 | 0.48-1.45 | 55 | 196.29 |
| Φ2.7×42 | 2.7 | 42 | 3.5 | 320 | 0.10-1.52 | 55 | 198.5 |
| Φ2.8×44 | 2.8 | 44 | 3.5 | 400 | 0.437-2.18 | 55 | 201.58 |
| Φ3.0×45 | 3 | 45 | 3.5 | 500 | 0.5-2.47 | 75 | 210.94 |
| Φ3.0×48 | 3 | 48 | 3.5 | 700 | 0.6-3.48 | 100 | 237 |
| Φ3.0×60 | 3 | 60 | 3.5 | 800 | 0.3-2 | 100 | 310 |
| Φ3.2×50 | 3.2 | 50 | 4 | 1000 | 0.6-3 | 125 | 278 |
| Φ3.3×52 | 3.3 | 52 | 3.5 | 1300 | 0.266-2.66 | 125 | 283 |
| Φ3.5×54 | 3.5 | 54 | 3.5 | 1500 | 0.55-3.4 | 220 | 363 |
| Φ3.6×70 | 3.6 | 70 | 3.5 | 1800 | 0.25-1.25 | 125 | 419 |
| Φ4.0×56 | 4 | 56 | 4 | 2300 | 0.41-4.07 | 315 | 456 |
| Φ4.0×60 | 4 | 60 | 3.5 | 2500 | 0.396-3.96 | 315 | 510 |
| Φ4.2×60 | 4.2 | 60 | 4 | 2750 | 0.4-3.98 | 375 | 633 |
| Φ4.3×60 | 4.3 | 60 | 3.5 | 3200 | 0.396-3.96 | 375 | 583 |
| Φ4.5×66 | 4.5 | 66 | 3.5 | 4000 | 0.41-4.1 | 560 | 710.4 |
| Φ4.7×74 | 4.7 | 74 | 4 | 4500 | 0.35-4 | 630 | 849 |
| Φ4.8×74 | 4.8 | 74 | 4 | 5000 | 0.396-3.96 | 630 | 899 |
| Φ5.0×74 | 5 | 74 | 4 | 6000 | 0.35-4 | 710 | 944 |
| Φ5.6×87 | 5.6 | 87 | 4 | 8000 | Max4.23 | 800 | 1265 |
| Φ6.0×95 | 6 | 95 | 4 | 10000 | Max5 | 950×2 | 1659 |
Cement Rotary Kiln Wet and Dry Cement Rotary Kiln
CITICIC Cement rotary kiln technical characteristics:
♦ Kiln body is made of high quality composed of carbon steel or
alloy steel plate and automatic welding;
♦ Tyre,Support Roller,Open gear adopts alloy cast steel;
♦ Sliding bearing with large gap not scraping tile bearing;
♦ Transmission device adopts hard tooth surface reducer, flexible
diaphragm coupling, dc motor;
♦ Adopts hydraulic gear wheel;
♦ Preheater scales were used respectively to veiw of kiln head, and
cylinder pressure tight seal;
♦ A slow drive device.
Cement Rotary Kiln Processes Wet and Dry Cement Rotary Kiln
With the arrival of rotary kilns, cement manufacturing processes
became sharply defined according to the form in which the raw
materials are fed to the kiln. Raw materials were either ground
with addition of water, to form a slurry containing typically
30-45% water, or they were ground dry, to form a powder or "raw
meal".
- In the Wet Process, the kiln system is fed with liquid slurry, the water then being
evaporated in the kiln.
- In the Semi-Wet Process, raw material is prepared as a slurry, but a substantial
proportion (50-80%) of the water is mechanically removed, usually
by filtration, and the resulting "filter cake" is fed to the kiln
system.
- In the Dry Process, the kiln system is fed with dry raw meal powder.
- In the Semi-Dry Process, a limited amount of water (10-15%) is added to dry raw meal so
that it can be nodulised, and the damp nodules are fed to the kiln
system.
Wet process cement rotary kilns Wet and Dry Cement Rotary Kiln
The original rotary cement kilns were called 'wet process' kilns.
In their basic form they were relatively simple compared with
modern developments. The raw meal was supplied at ambient
temperature in the form of a slurry.
A wet process kiln may be up to 200m long and 6m in diameter. It
has to be long because a lot of water has to be evaporated and the
process of heat transfer is not very efficient.
The slurry may contain about 40% water. This takes a lot of energy
to evaporate and various developments of the wet process were aimed
at reducing the water content of the raw meal. An example of this
is the 'filter press' (imagine a musical accordion 10-20 metres
long and several metres across) - such adaptions were described as
'semi-wet' processes.
The wet process has survived for over a century because many raw
materials are suited to blending as a slurry. Also, for many years,
it was technically difficult to get dry powders to blend
adequately.
Dry process cement rotary kilns Wet and Dry Cement Rotary Kiln
In a modern works, the blended raw material enters the kiln via the
pre-heater tower. Here, hot gases from the kiln, and probably the
cooled clinker at the far end of the kiln, are used to heat the raw
meal. As a result, the raw meal is already hot before it enters the
kiln.
The dry process is much more thermally efficient than the wet
process.
CITIC IC began in 1956-The largest mining equipment and cement
equipment manufacturers in China.CITIC IC is a global supplier of
technology and services to customers in the process
industries,including
Mining,Construction,Metallurgical,Environmental,Power,Chemical,Marine,Casting&Forgings.
CITIC IC produces over 200,000 tons of quality equipment annually.
Our products include grinding mills, scrubbers,crushers, kilns,
coolers, hoists, reducers, steam turbines and compressors. CITIC IC
also manufactures heavy castings and forgings, as well as
electric/hydraulic control and lubrication systems.
Our factory in Luoyang covers more than 3 million square meters, of
which 2 million square meters is under cover. It has a total
workforce of approximately 10,000 employees of which more than
1,200 are engineers.
CITIC IC produces over 200,000 tons of quality equipment annually.
Our products include grinding mills, scrubbers,crushers, kilns,
coolers, hoists, reducers, steam turbines and compressors. CITIC IC
also manufactures heavy castings and forgings, as well as
electric/hydraulic control and lubrication systems Etc.
Machining Equipment | Fabrication Equipment |
Casting & Forging Equipment | Heat treatment Equipment |
Our Services
Aftersales service
CITIC Heavy Industries is your business partner in the After
Market.
CITIC IC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
CITIC’s Field Service Engineers are trained specifically in the
CITIC brand group products but are capable of undertaking the
servicing of other OEM brands.
Our technicians are equipped with the most advanced technological
diagnostic equipment available to trouble shoot your equipment to
optimise performance and minimise down time.
CITICIC also has an extensive capability in supplying all you
consumable and electrical/ mechanical spare part needs.
