4x2 Drive 214kw 100km/H Emergency Rescue Fire Fighting Vehicle with
Independent Cab
Generator:
Model: Gasoline generator ET12000 (Honda power)
Rated output power(kVA): 10(Three-phase),2.7kVA×3(Single-phase)
Maximum output power(kVA): 11(Three-phase),3.0kVA×3(Single-phase)
Power factor: 0.8
Voltage(V): 380/220
Electric current(A): 11.6A×3(Single-phase),14.4A
Frequency(HZ): 50
Fuel: Gasoline
Continuous working time(hr): 6.5
Lifting lighting system:
Manufacturer: Zhejiang SENKEN
Model: SG 65-41000G
Lifting height: 6.5M
AGL: ≥7.6m
Control system voltage: DC24V
Lamp voltage: 220V
Lamp power: 4 × 1000W
Lamps horizontal rotation angle: 380 °
Lamps vertical rotation angle: 330 °
Lamp luminous flux: 220000lm
Truck Cranes
Manufacturer: Finland (HIAB) Company
Model HIAB 111 B-2CLX type
Lifting capacity: 9.9tm
Rotary torque: 14.1KN.m
Rotation angle: 406 ° (rear side of safe operating range 180 °)
Outrigger span: 4.8 m
Crane weight: 1480 kg
Equipment boxes:
Material: Q235A combination of high-quality aluminum alloy steel.
Structure: welding, lap structure, skin, floor, interior panels use
rust-proof aluminum plane, pedal tread surface, car roof using
aluminum patterns.
Equipment compartment door: the light quality aluminum alloy, with
shutter doors, lightweight and reliable.
Electrical System:
The main lights in the cab at the top of the long row of lights,
configure the 100W alarm control system; a strobe lights installed
on both sides and the middle of each compartment (two red and
blue), on both sides of the vehicle is provided with LED side
lights installed below the rear side marker lamps, after the
installation of the contour light.
