Product Description
Fiberglass adhesive mesh is made from C-glass or E-glass woven
fabric then coated by acrylic acid copolymer liquid and adhesive
glue. It is widely used for Exterior Insulation Finishing Systems
(EIFS), Waterproof Roofing and Stone Reinforcement. Repair dry
board wall, plasterboard joint, crack of wall and other wall
surface breakage. Excellent alkali resistance, durable; high
tensile strength and deformation resistance, crack prevention; no
deterioration, no foam; excellent self-viscosity, no need to
pre-bottom coating, quick, easy to use.
Specification
| Roll width | 50mm(2inch),100mm(4inch),150mm(6inch),200mm(8inch) |
| Roll length | 20m(22y),45m(50y),90m(100y),153m(168y) |
| Available colors | 50mm,75mm |
| Diameter of paper core | 50mm,75mm |
| Application | Drywall repairing,gypsum board jointing,cracks repairing |
Useage
repair dry wall, gypsum board joints, all kinds of wall cracks and
other wall damage
Application Method
1. Keep walls clean and dry.
2. Tape the cracks and hold them tight.
3. Make sure the gap is covered by tape,then cut off the excess
tape with a knife,and finally brush with mortar.
4. Let it dry naturally,then gently polish it with a construction
hammer.
5. Fill with enough paint to make the wall smooth.
