Product description
Stapler blade is programmed in the same instrument, which can meet
the test requirements of different blade shapes
Product introduction:
It adopts 5.7 inch (320 × 240) single color LCD touch screen and
Chinese menu display. Nominal specification, test times,
pressurization, up, down, time, calibration. The menu on LCD is
controlled by keyboard, and test data is printed on board. Real
time display of edge sharpness force and peak force data, maximum
sharpness and other peak force curves can be displayed. Stapler
blade is programmed in the same instrument, which can meet the test
requirements of three different blade shapes, and different
fixtures need to be replaced.
Test range: 0.1 ~ 10N, accuracy: ± 0.01N; sharpness of different
kinds of blades (straight, round, annular) can be measured.
Moving speed: 100 mm / min;
Cutting material: 4-0 suture, in line with yy0174-2005 and other
relevant standards;
Printing mode: it can print the test data, average cutting force
and deviation value of 3 points of the blade each time.
LCD: made in Taiwan. Sensor: Mettler Toledo.
Machinery: aluminum alloy oxidation treatment, 304 stainless steel,
high speed AD conversion, closed-loop loading cutting force.
Motor: subdivided stepping motor.
Software: the main CPU adopts AVR technology, with RS232
communication interface, and the software can be timely upgraded.
Net weight: 11kg
Overall dimension: 400 × 290 × 275 (mm).
