PRODUCT DESCRIPTION
This is a 4-channel wireless remote control replacement for garage
doors, electronic gate doors, alarm systems, cars, car alarms, home
alarms, panic buttons, garage doors, rolling curtain, etc. It's a
fixed frequency frequency meter (we offer both 315Mhz and 433Mhz)
for cloning 99.99% common fixed and learning code remote controls.
4-channel means it's able to be used to clone up to 4 remote
signals from 4 different remotes (use one remote to control 4 gate
doors)!
- Color: Black and Silver w/ metal key ring
- Quantity: 1 pc
- Size: 5.5 x 3.3 x 1.6 cm (LxWxH)
- Weight: 39g
- Operating frequency: 433.92MHz/315Mhz fixed frequency
- Distance: Up to 100 meters
- Battery: Included
With this replacement remote key you can clone all 315Mhz/433.92MHz
fixed code key fobs based on supported chip codes: PT2240, PT2260,
EV1527, PT2262, FP527, AX5326, PT2262, PT2242, HT6207, HT6010,
HT6012, HT6014, AX5326-4, SMC5026, SMC5326-3, SMC918, SMC918-3,
SMC918-4, HT680, HT600 etc... You can check CHIP CODE from your
original remote to see if the replacement is supported and
compatible.
Look at the above image for an example, the chip code can be same
or different, important numbers only.
Note: Rolling code remotes is incompatible.
PRODUCT FEATURES
- Metal frame and durable plastic case make it sturdy and durable
- Button slide cover to protect buttons avoid accidental unplanned
operation
- You can still keep & use your original factory remotes as well as
what a bonus
- Codes into your garage door in less than 30 seconds
- Handy key chain size attaches to your car keys no more unwanted
bulkiness
PROGRAMMING INSTRUCTIONS
Press and hold LOCK and UNLOCK keys at the same time until the blue
LED flashes for 3 times, now keep holding the LOCK key, and press
UNLOCK key for 3 times slowly within 5 seconds until LED flashes
quickly and continuously, now release all keys (This step is to
clear existing code in the replacement remote).
Take the original remote in your left hand, while the cloner on
your right hand, put them close together/side by side so that they
are touching. Simultaneously press a button on your original remote
key and one of the buttons on the replacement and hold them until
the blue light on the cloner flashes steadily. (The Blue Light will
first flash 3 times quick, then stops for a second, and then
flashes steadily when cloned successfully).
Programming is now successful! If you want to program more buttons
simply repeat steps 2. It's that easy! To reset the remote simply
start again with step 1. If you reset your replacement remote key
incautiously or if you want to discard all changes, just press the
two bottom buttons (MUTE & LIGHTING) for about 3 seconds until the
blue light flashes quickly.
BATTERY SAVING MODE
Press ANY key or multi-keys at the same time for 15 seconds, the
remote will stop working to save battery power.
WHAT'S INCLUDED
1* Replacement Remote Controller Duplicator (with battery included)
