Medical Electronics OEM Service PCBA Prototype PCB Assembly
Manufacturing Printed Circuit Board
PCB Manufacturing & Assembly for the Medical Device Industry
PCB electronic products have made tremendous contributions to the
medical industry as diagnostic, monitoring and therapeutic
equipment. The medical applications of these electronic devices
continue to evolve with the development of electronic technology
and become more efficient and dense, resulting in unlimited new
possibilities. The core of these medical devices is the PCB. PCBs
in the medical industry are highly specialized to adapt to the
unique constraints of medical devices. In many medical
applications, a small package is needed to meet the size
requirements of implants or emergency room monitors. Therefore,
medical PCBs are often special high-density interconnect PCBs, also
known as HDI PCBs. Medical PCBs can also be made from flexible
substrates, allowing the PCB to bend during use, which is essential
for both internal and external medical equipment
Due to the health effects associated with it, medical PCB standards
are higher than most other PCB types. Repeatability and reliability
are the two basic elements that medical PCB suppliers must achieve,
in addition to complying with strict medical regulations.
| OEM Services: | | | |
| Layers | 1-48 layers | Min. line width | 2mil |
Max.board size (single&doule sided) | 700*1200mm | Min.annular ring width: vias | 3mil |
| Surface finish | HAL(with Pb free),plated Ni/Au, Immersion silver,Imm Ni/Au,Imm Sn, hard gold,OSP,ect | Min.board thickness(multilayer) | 4layers:0.4mm; 6layers:0.6mm; 8layers:1mm; 10layers:1.2mm |
| Board materials | FR4; high Tg; high CTI; halogen free; high frequency(rogers,taconic, PTFE,nelcon, ISOLA,polyclad 370 HR); thick copper | Plating thickness (Technique: Immersion Ni/Au) | Plating type: Imm Ni, Min./Max thickness:100/150U'' Plating type:
Imm Au, Min./Max thickness:2/4U'' |
| Impedance control | ± 10% | Distance between line to board edge | Outline: 0.2mm V-CUT: 0.4mm |
Base copper thickness(Inner and outer layer) | Min. thickness:1/3 OZ Max.thickness:6OZ | Min.hole size(board thickness ≥2mm) | Aspect ratio≤16 |
| Finished copper thickness | Outer layers:Min.thickness 1 OZ,Max.thickness 10 OZ Inner layers: Min.thickness 0.5OZ, Max.thickness 6OZ | Max.board thickness(single&doule sided) | 6mm
|
The development of medical PCB applications is as fast as the
medical device industry itself. Some of the most common medical PCB
applications include
Monitors: Personal and medical monitors contain PCBs, including
blood glucose monitors, heart rate and blood pressure monitors,
etc.
Scanning technology: CT scanners and ultrasonic technology usually
use PCB-based electronic equipment.
Control system: The equipment that controls fluid infusion, flow
and distribution is electronically controlled.
Internal equipment: pacemakers and similar internal medical
equipment maintain the health of patients through tiny PCBs in the
center.
Scientific Instruments: Medical research uses many scientific
instruments to study diseases and test the results of patients.
These include electron microscopes for generators and compressors,
photometers and control systems, etc.
ISO13485 is also called "medical device quality management system
for regulatory requirements".
Scope of quality management system certification: Production of PCB
components for electrocardiograph and endoscope.Through IS013485:
2016 certification, it not only proves that under the quality
assurance system, FASTPCBA can continuously provide high-quality
products that meet the needs of medical device customers, and
further demonstrates our company's higher requirements for product
quality standards. The successful passing of this IS013485: 2016
certification is an endorsement of FASTPCBA product quality and
safety regulations aspects.
FASTPCBA will continue to maintain the refined management mode,
further improve the management mechanism, and strive to create
better quality, higher-end products. At the same time, make the
company continue to develop in a better direction.
We have a global sales team available to assist you with PCB
Manufacturing & PCB Assembly services,Send your PCB files to get
better price now !
Turn your medical project to pcba, contact us
