Product introduction of 3 Axle Fuel Oil Petrol Milk Liquid Water
Semi Truck Tank Tankers Semi Trailer
Qingdao Genron International Trade Co.Ltd over 10 yrs manufacturing
experience and start international business in 2004. It is focusing
on truck trailer, trailer parts and vehicle manufacturing.The
factory covers 190,000m2. It owns complete R&D center, vehicle
and parts inspection center, rollover test laboratory, collision
test place also large trailer stock. The large truck trailer
workshops allow a monthly produce capacity over 2000 unit trailers
per month.The trailer payload from 20 up to 300 tons to meet
different road transportation demand. The product range including
semi trailers (such as extendable and modular low bed trailers,
flatbed and draw bar trailers, oil tanker trailers bulk cement
tanker trailers) and very one of them an innovative and efficient
transport solution with an excellent price / quality ratio. Now,
genron semi trailers are widely exported to most Africa market such
as Algeria, Djibouti, Ethiopia , Kenya , Sudan , Uganda , Malawi ,
Tanzania , Cameroon , Ghana also Dubai , Russia , Zimbabwe ,
Malaysia , Philippines, Vietnam , Singapore,Trinidad and Tobago and
South-America market
3 axle oil fuel tank semi trailer adopt advanced design concept. We
also can produce the tanker trailers for different liquid like
fuel, petrol, water, palm oil etc.
To make sure the safety, our standard trailers adopt the Bottom
Emergency valves. This can help the tankers to prevent oil leakage,
when emergency happens.
Fuel tanker trailers Major parts and components of the trailer are
processed by advanced equipment. Also we adopt world famous brand
of parts, like JOST, WABCO braking valve etc.
| Main Dimensions |
| Tank Body |
| Shape | Optional ( Round or Square) |
| Dimension | 12000mm*2490mm*3990mm ( Exact size depends on the final design) |
| Tare weight | About 8000KGS-12800KGS |
| Total Volume(m3) | 25m³-60 m³ |
| Tanker Body Material | 5mm or 6mm/ Q235 carbon steel /aluminum /stainless steel |
| End Plate | 5mm or 6mm /Q235 carbon steel /aluminum /stainless steel |
| Manhole Cover | Carbon steel or Aluminum alloy API manhole cover, ∮500mm |
| Bottom Valve | Aluminum API Pneumatic Bottom Valve |
| Discharging Valve | Diameter is 3 or 4 inch |
| Compartments | Optional |
| Discharging Pipe | 4” rubber hose, 2 pcs, 6m/each |
| Cat Walk | With (Common model or special design) |
| Chassis |
| Main Beams | Welding design or Special design I beam, connected by bolts and
nuts Q345 carbon steel material |
| Axle | 3 axles, BPW/FUWA/GV brand |
| Landing Gear | JOST (D200T)or CHINA BRAND 28T |
| King Pin | JOST 2.00 or 3.5 inch bolt-in king pin |
| Suspension | Mechanical suspension/Germany or America type /air suspension |
| Leaf Spring | 90(W)mm*13(Thickness)mm*10 Layer or 100mm*12mm*12 /without |
| Pneumatic Braking System | 6 relay valves; Spring brake chamber; one piece of 45L air tanks. |
| Rim | 9.00-22.5/8.00-20/8.5-20 China Brand |
| Tire | /12.00R22.5/315 80R22.5/11.00R20 /12.00R20 Brand is optional |
| ABS | Optional |
| Painting | Complete Chassis sand blasting to clean rust, 1 coat of
anticorrosive prime, 2 coats of final paint |
| Accessories | One standard tool box |
| Shipping Terms | By Bulk Cargo ,RORO or 40HQ Containers |
Feature of 3 Axle Fuel Oil Petrol Milk Liquid Water Semi Truck Tank
Tankers Semi Trailer
1. the tank shape: square round, oval, round.
2. tank material: carbon steel, stainless steel, steel lined, glass
steel
3. the tank is equipped with multi-channel anti-wave partitions,
and can be divided into different compartments and load different
oil. And can be achieved the pump into, pump out through the table,
and pump into, pump out not the table, self-flow through table, and
not but table.
4. The use of high-pressure gas leak detection, the tank has a high
strength, the center of gravity stability, vehicle safety and
stability characteristics.
5. All kinds of alcohol, sulfuric acid, hydrochloric acid, salted
chemical tanker use imported stainless steel (thickness of 4mm-5mm)
or plastic cans (polypropylene) (thickness of 12mm-22mm)
manufacturing.
6. The fuel tank is composed of a power take-off device, a drive
shaft, a gear oil pump, a tank body and a pipe network system.Pipe
network system consists of oil pump, three-way four-ball valve,
two-way ball valve, filter, pipe composition.
7. Fuel dispenser and reel are optional.
8. Gear pump, centrifugal pump, heavy oil pump, stainless steel
pump are available and can be installed heating pipe and insulation
layer.
Our company
Our service
Before sale
A: Quotation:
We will gave you the matched product details configuration and
drawing according to your market, show you the best-selling model
pictures and reasonable best price.
B. Reception & Accompany: After you accepted the offer price we
have made to your company have the pre-interview ,you can come to
visit our office and then go to visit factory ,we will arrange your
everything in China. Or if you not sure which model of trailer or
other product you should chose ,we can arrange our professional
technical checking your market together with you.
After sale
We have our own technical team, we will gave you repaired method
within 12 hours through calling or email. We can go to visit you
gave you technical guide after or before you buy 'Genron' products.
We will post to you all spare parts for free within guarantee
period after the spare parts were out of work which are under
normal operation.
FAQ
Q: Why do you choose Genron?
A:11 years overseas experience:
As our more than 11 years overseas produce and exporting business
experience focus on the trailer and truck filed ,We used nine years
visited on Ghana, Burkina faso, Cameroon, Mozambique, Zambia,
Tanzania, Kenya, Malaysia, Indonesia, Philippine, Vietnam, LAOS,
Mayanmar, Algeria, Dubai
Mirror Trading:
We will gave you the best price and quality product .Because we
hope our cooperation like mirror,Customer as mirror,one side is
factory,inside is Genron.
We Minimize all loses that may arise from the producers.We respond
to the demands and requirements of the companies, we work with in
the most effective way and as soon as possible.
Professional Technical Team:
The strong advantage of Genron compare with other trading company
and company is we have our own professional design team: One
engineer Mr.Fanming Bu (working for CIMC company five years,design
trailer and production line six years),Five
technicalperson:Mr.Wenming Zhao(design tanker trailer for 11
years),Mr. Xianzhen Zhao(design welding machinery four
years),Mr.Haifeng Liu(design trailer axles four years). Mr.Zuoliang
Yang(design tipper trailer six years).Mr.Jihe Cao(Design tanker
trailer five years).
Q: How we can cooperate (Business Partnership)?
A:As your China Purchasing Agent:
You can buy from the factory directly, we can be your exporting
agent in China.
You can be Genron Sales Agent: We have our own brand and logo,we
have more than three very Steady producer partners of each product
which we supply to you in China,if you can be our agent in your
country you will have very steady supplier no worried one factory
will close down.
Q: What is Genron profit?
A: To be Purchase agent: You buy the product from the factory I
help you export off china and shipping to your Country port,you
should pay 5% FOB price of the goods for us. You buy from Genron or
to be agent of Genron:The factory will pay us export agent fees.
